Handleiding
Je bekijkt pagina 24 van 52
English-24
Troubleshooting
Refer to the following chart if the air conditioner operates abnormally. This may save time and unnecessary
expenses.
PROBLEM SOLUTION
The air conditioner does
not work at all.
• Check power status and then operate the air conditioner again.
• Plug in or switch on the circuit breaker and then operate the air conditioner
again.
• Ensure Isolator is switch on.
The temperature
adjustment is not working.
• Check if you have selected Dry/Fan/Fast mode. In these modes, set
temperature is set to auto and you cannot adjust the temperature.
Cool air does not come out
of the air conditioner.
• Check if the set temperature is higher(during Cool mode) than the current
temperature. Press the Temp + or - button on the remote controller to change
the set temperature.
• Check if the Air filter is blocked by dirt. If there is a lot of dust on the Air filter,
cooling performance may decrease. Clean them frequently.
• Check if the outdoor unit is covered or installed near the obstacle. Take the
cover off and take the obstacle away.
• Check if the air conditioner is operating in defrost mode. When the ice formed
in winter or the outdoor temperature is too low, the air conditioner operates
in defrost mode automatically. In defrost mode, indoor fan stops and warm air
does not come out.
• If the doors or windows are open, it may cause bad cooling performance. Close
the doors and windows.
• Check if the air conditioner has just been turned on after stopping cooling
operation. In this case, just a fan will run to protect the outdoor unit
compressor.
• Check if the pipe length is too long. When the pipe length exceeds maximum
allowable pipe length, cooling performance may decrease.
Fan speed adjustment is
not working.
• Check if you have selected Dry/good'sleep mode. In these mode, fan speed is
set to Auto and you cannot adjust the fan speed.
Remote controller is not
working.
• Check if your batteries are depleted.
• Make sure nothing is blocking your remote controller sensor.
• Check that there are strong lighting apparatus near the air conditioner. Strong
light which comes from fluorescent bulbs or neon signs may interrupt the
electric waves.
Timer function does not
set.
• Check if you press the Set button on the remote controller after you have set
the time.
The indicator is blinking
continuously.
• Press the Power
button or disconnect the power plug/switch off the
auxiliary power switch.
• If the indicator is still blinking, contact the service center.
Odors permeate in the
room during operation.
• Check if the appliance is running in a smoky area. Ventilate the room or
operate the air conditioner in Fan mode for 1~2 hours. (We do not use smelly
components in the air conditioner.)
• Check the Drains have been cleared Regular Maintenance.
RAC TCL ODM 아프리카향 IBIM_EN_Ver.1.0.indd 24 2019-04-08 오후 1:24:07
Bekijk gratis de handleiding van Samsung AR12RRFLFWK, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Samsung |
| Model | AR12RRFLFWK |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 5411 MB |
