Samsung AR12HCFQAWK handleiding

Handleiding

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849/ 49

Afdrukken

Je bekijkt pagina 38 van 49

Installing and connecting the assembly pipe of the indoor unit

1. Cut out the appropriate knock-out piece (A or B) on the rear of the

indoor unit unless you connect the pipe directly from the rear.

2. Smooth the cut edges.

3. Remove the protection caps of the pipes and connect the assembly

pipe to each pipe. Tighten the nuts rst with your hands, and then

with a torque wrench, applying the following torque:

Connect indoor and outdoor units with eld-supplied copper pipes by means of are connections. Use insulated seamless

refrigerationgradepipeonly,(CuDHPtypeaccordingtoISO1337),degreasedanddeoxidized,suitableforoperatingpressures

ofatleast4200kPaandforburstpressureofatleast20700kPa.Undernocircumstancesmustsanitarytypecopperpipebe

used.

There are 2 refrigerant pipes of dierent diameters:

 •Thesmalleroneisfortheliquidrefrigerant

 •Thelargeroneisforthegasrefrigerant

A short pipe is already tted to the air conditioner. You may

need to extend the pipe using the assembly pipe (optional).

The connection procedure for the refrigerant pipe varies

according to the exit position of the pipe when facing the wall:

 •Right(A)

 •Left(B)

 •Underside(C)

 •Rear

Outer Diameter

Torque

N•m kgf•cm

ø6.35 mm 14~18 140~180

ø9.52 mm 34~42 350~430

ø12.70 mm 49~61 500~620

ø15.88 mm 68~82 690~830

• Ifyouwanttoshortenorextendthepipes,refertopage38~49.

4. Cut o the remaining foam insulation.

5. If necessary, bend the pipe to t along the bottom of the indoor unit.

Then pull it out through the appropriate hole.

 

The pipe should not project from the rear of the indoor unit.

 

The bending radius should be 100 mm or more.

6. Pass the pipe through the hole in the wall.

7. For further details on how to connect to the outdoor unit and evacuate the air, refer to page 42~43.

• Tightenthearenutwithtorquewrenchaccordingtospeciedmethod.

If the are nut is over-tightened, the are may break and cause refrigerant gas leakage.

• DONOTWALLUPTHEPIPECONNECTION!

All refrigerant pipe connection must be easy accessible and serviceable.

• Thepipewillbeinsulatedandxedpermanentlyintopositionafternishingtheinstallationandthegasleaktest;

refer to page 44 for further details.

B

A

C

English-37

INSTALLATION07

Midea ODM Africa CO IB&IM_DB68-00000A_EN.indd 37 2014/5/26 10:27:17

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849/ 49

Bekijk gratis de handleiding van Samsung AR12HCFQAWK, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Gerelateerde producten van Samsung (Niet gecategoriseerd)

Handleiding bekijken

Samsung SCH-N356

Niet gecategoriseerd - handleiding

Handleiding bekijken

Samsung EP-L4020

Niet gecategoriseerd - handleiding

Handleiding bekijken

Samsung SGH-X838

Niet gecategoriseerd - handleiding

Handleiding bekijken

Samsung MM-L2

Niet gecategoriseerd - handleiding

Handleiding bekijken

Samsung SP-56K3HV

Niet gecategoriseerd - handleiding

Handleiding bekijken

Samsung LS17E34C

Niet gecategoriseerd - handleiding

Handleiding bekijken

Samsung SP-61L2HX

Niet gecategoriseerd - handleiding

Handleiding bekijken

Samsung PS50A567S3W

Niet gecategoriseerd - handleiding

Andere merken in Niet gecategoriseerd