Handleiding
Je bekijkt pagina 9 van 56
E
-
9
You can start the air conditioner in Auto mode from your remote
control. In the Auto mode, the cooling operation is selected
automatically. You can also raise or lower the temperature but not
the fan speed.
1
If necessary, press the
button.
Result:
◆
The operation indicator on the indoor unit lights up.
◆
The air conditioner starts up in the mode selected
when the unit was last used.
◆
The indoor unit beeps.
IMPORTANT
The air conditioner is fitted with protection mechanism
to prevent the unit from being damaged when it is started
immediately after being:
◆
Plugged in
◆
Stopped
lt will start up normally after three minutes.
2
If the
is not displayed at the top of the remote control,
press the
button on the remote control one or more times until it
appears.
Result:
◆
The indoor unit beeps each time you press the button.
◆
The air conditioner runs in the Auto mode.
3
To adjust the temperature, press the
button one or more times until
the required temperature is displayed.
Possible temperatures are between 16°C and 30°C inclusive.
Result:
◆
Each time you press the button:
- The temperature is adjusted by 1°C
- The indoor unit beeps
Note
You can change modes at any time.
Selecting the Automatic Operating Mode
Bekijk gratis de handleiding van Samsung AQ09NLN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Samsung |
| Model | AQ09NLN |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 7001 MB |
