Handleiding
Je bekijkt pagina 39 van 60
39
English
Installation Procedure
Step 6 Setting the indoor unit
addresses and the installation
options
You cannot set both of the indoor unit addresses and
the installation options in a batch: set both of them
respectively.
Common steps for setting the
addresses and options
Low Temp button
High Temp button
Mode button
Low Fan button
High Fan button
Setting the
option values
Entering the
mode for setting
the options
NOTE
• The remote control display and buttons may vary
depending on the model.
1 Enter the mode for setting the options:
a Remove the batteries from the remote
control, and then insert them again.
b While holding down the
(High Temp) and
(Low Temp) buttons simultaneously, insert
the batteries into the remote control.
c Make sure that you are entered to the mode
for setting the options:
2 Set the option values.
CAUTION
•
SEG1 to SEG24.
• Because SEG1, SEG7, SEG13, and SEG19 are the
page options used by the previous remote control
models, the modes to set values for these options
are skipped automatically.
• Set a 2-digit value for each option pair in the
SEG1 SEG2 SEG3 SEG4 SEG5 SEG6
0 X X X X X
SEG7 SEG8 SEG9 SEG10 SEG11 SEG12
1 X X X X X
SEG13 SEG14 SEG15 SEG16 SEG17 SEG18
2 X X X X X
SEG19 SEG20 SEG21 SEG22 SEG23 SEG24
3 X X X X X
On (SEG1 to SEG12) Off (SEG13 to SEG24)
DB68-13032A-00_IBIM_DVM R32 WindFree 1,4way_EU_EN_.indd 39DB68-13032A-00_IBIM_DVM R32 WindFree 1,4way_EU_EN_.indd 39 2024-07-29 오전 10:10:512024-07-29 오전 10:10:51
Bekijk gratis de handleiding van Samsung AM140DN4DKG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Samsung |
| Model | AM140DN4DKG |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 5649 MB |
