Samsung AM140DN4DKG handleiding

Airco

Samsung

60 pagina's

PDF beschikbaar

Handleiding

English

Cleaning and Maintenance

Problem Solution

The product does not

work.

Error E116, E695, E698,

E699, E700

• This error occurs when the R-32 refrigerant sensor has a malfunction or the

sensor’s life has expired.

• The R-32 sensor’s lifespan is 10 years. The wired remote control displays

‘E699’ 6 months before the sensor’s lifespan expires. After the sensor's

lifespan expires, the wired remote control displays ‘E700’, and the product

usage is limited.

• Contact the Samsung Electronics service centre for assistance.

The air conditioner

does not operate

immediately after it

has been restarted.

• Because of the protective mechanism, the appliance does not start operating

immediately to keep the unit from overloading. The air conditioner will start

in 3 minutes.

The air conditioner

does not operate at

all.

• Check whether the power is turned on, and then operate the air conditioner

again.

• Check whether the auxiliary power switch (MCCB, ELB) is turned on.

• If the auxiliary power switch (MCCB, ELB) is turned off, the air conditioner

does not work although you press the

(Power) button.

• When you clean the air conditioner or do not use it for an extended period of

time, turn off the auxiliary power switch (MCCB, ELB).

• After the air conditioner is not used for an extended period of time, be sure

to turn on the auxiliary power switch (MCCB, ELB) 6 hours before starting

operation.

NOTE

• The auxiliary power switch (MCCB, ELB) is sold separately.

• Make sure that auxiliary power switch (MCCB, ELB) is installed in the

distribution box inside the building.

• If the air conditioner is turned off by the Timed off function, turn on the air

conditioner again by pressing the

(Power) button.

The temperature does

not change.

• Check whether the Fan mode is running. In the Fan mode, the air conditioner

controls the set temperature automatically, and you cannot change the set

temperature.

Warm air does not

come out of the air

conditioner.

• Check whether the outdoor unit is designed for cooling only. In this case,

warm air does not come out although you select the Heat mode.

• Check whether the remote control is designed only for cooling only. Use a

remote control that supports both cooling and heating.

The fan speed does

not change.

• Check whether the Auto or Dry mode is running. In these modes, the air conditioner

controls the fan speed automatically, and you cannot change the fan speed.

The wireless remote

control does not

operate.

• Check whether the batteries are discharged. Replace the batteries with new ones.

• Make sure that nothing is blocking the remote control sensor.

• Check whether any strong lighting sources are near the air conditioner. Strong

light which comes from fluorescent bulbs or neon signs may interfere with the

remote control.

DB68-13032A-00_IBIM_DVM R32 WindFree 1,4way_EU_EN_.indd 25DB68-13032A-00_IBIM_DVM R32 WindFree 1,4way_EU_EN_.indd 25 2024-07-29 오전 10:10:482024-07-29 오전 10:10:48

Bekijk gratis de handleiding van Samsung AM140DN4DKG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.