Handleiding
Je bekijkt pagina 22 van 54
ENGLISH-22
Connecting the cable
Wiring diagram of power cable
When using ELB for 1 phase and 3 phase
N
L3(T)
L2(S)
L1(R)
N
L
2(N)
1(L)
Power Supply
Electrical component box
MCCB
+
ELB
ELCB
Hydro unit
f 1 phase
f 3 phase
Communication
cable
Main power cable
Cable
clamp
❋ The appearance of the unit may be
dierent from the picture depending on
the model.
Cable tie
Cable tie
Cable clamp
Communication
cable
3 Phase 4 Wires power
cable (AC 380-415V)
NOT USE
• You should connect the power cable into the power cable terminal and fasten it with a clamp.
• The unbalanced power must be maintained within 2% of supply rating.
- If the power is unbalanced greatly, it may shorten the life of the condenser. If the unbalanced power is
exceeded over 4% of supply rating, the indoor unit is protected, stopped and the error mode indicates.
•
To protect the product from water and possible shock, you should keep the power cable and the connection cord of
the indoor and outdoor units within ducts. (with appropriate IP rating and material selection for your application)
• Ensure that main supply connection is made through a switch that disconnects all poles, with contact gap of a
least 3 mm.
• Devices disconnected from the power supply should be completely disconnected in the condition of
overvoltage category.
• Keep distances of 50mm or more between power cable and communication cable.
CAUTION
ki]_TXYYXXhTWWptlozGyTZYGzwsp{Gv|{kvvyG䚐⣡㫴l|luUGGGYY YWYZTWXTX_GGG㝘㤸G`a\Xa[Z
Bekijk gratis de handleiding van Samsung AE090CXEDGG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Samsung |
| Model | AE090CXEDGG |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 5125 MB |
