Handleiding
Je bekijkt pagina 19 van 38
19English
Advanced Operation
Setting the On timer
When the air conditioner is turned off:
1. Press the
button to select (On).
• The (On) indicator will keep blinking and you can set the time.
2. Press the or button to set the time.
• You can set the time in half hour intervals from
30minutes (0.5 on the display) to 3in hour intervals
from 3 to 24 hours.
• The time can be set from minimum 30 minutes to
maximum 24hours.
3. Press the button to complete the On timer setting.
• The (On) indicator and the set time of the timer will be
displayed on the remote control display.
• On timer setting will be cancelled if you don't press the
button within 10seconds after setting the time.
Therefore, check for the (On) indicator on the remote
control display.
Cancel
Press the
button ► select (On) ► press
the or button ► set the timer to
► press the button
Remote control display
Additional options available in the On timer
Select the mode in the following order: (Auto) ► (Cool) ► (Dry) ► (Fan) and ► (Heat).
You can adjust the temperature after timer setting is completed.
Temperature adjustment is only available in Auto, Cool, Dry, and Heat modes. In Fan
mode, the temperature cannot be adjusted.
NOTE
• When On timer setting is completed, the setting will be displayed for 3 seconds, and then only the
(On) indicator will remain on the remote control display.
• You cannot set the Fan speed when setting the On timer.
The actual product may differ slightly from the image depicted below.
Setting the On or Off timer
Advanced Operation
Bekijk gratis de handleiding van Samsung AE071MNADEH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Samsung |
| Model | AE071MNADEH |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 3923 MB |
