Samsung AC035FE1DKF handleiding

Airco

Samsung

46 pagina's

PDF beschikbaar

Handleiding

English

Safety Information

• Do not install the product in a ship or a vehicle (such as a

campervan). Salt, vibration or other environmental factor

may cause the product malfunction, electric shock or fire.

• Excessive indoor humidity or clogged condensate drain

lines may cause water to drip from indoor units. Do not

install the indoor unit where dripping could result in

damage to property, such as above electronic equipment or

other sensitive instruments.

• Our units should be installed in compliance with the

spaces shown in the installation manual, to ensure

accessibility from both sides and allow repairs or

maintenance operations to be carried out. The

unit’s components should be accessible and easy to

disassemble without endangering people and objects.

• For this reason, when provisions of the installation

manual are not complied with, the cost required to

access and repair the units (in SAFETY CONDITIONS,

as set out in prevailing regulations) with harnesses,

ladders, scaffolding or any other elevation system will

NOT be considered part of the warranty and will be

charged to the end customer.

• The local gas regulations shall be observed.

• To handle, purge, and dispose the refrigerant, or break

into the refrigerant circuit, the worker should have a

certificate from an industry-accredited authority.

• While in installation or relocation of the product, do

not mix the refrigerant with other gases including air

or unspecified refrigerant. Failure to do so may cause

pressure increase to result in rupture or injury.

• Do not cut or burn the refrigerant container or pipings.

• Installation must be carried out by qualified personnel

for handling the refrigerant. Additionally, reference the

regulations and laws.

• Be careful not to let foreign substances (lubricating oil,

refrigerant, water, etc.) enter the pipings.

• When mechanical ventilation is required, ventilation

openings shall be kept clear of obstruction.

• For disposal of the product, follow the local laws and

regulations.

• Do not work in a confined place.

• The work area shall be blocked.

• The refrigerant pipings shall be installed in the position

where there are no substances that may result in

corrosion.

• The following checks shall be performed for installation :

– The charging amount depends on the room size.

– The ventilation devices and outlets are operating

normally and are not obstructed.

– Markings and signs on the equipment shall be

visible and legible.

• Upon leakage of the refrigerant, ventilate the room.

When the leaked refrigerant is exposed to flame, it may

cause generation of toxic gases.

• Make sure that the work area is safe from flammable

substances.

• Note that the refrigerant has no odour.

• The units are not explosion proof so they must be

installed with no risk of explosion.

• This product contains fluorinated gases that contribute

to global greenhouse effect. Accordingly, do not vent

gases into the atmosphere.

• For installation with handling the refrigerant(R-32), use

dedicated tools and piping materials. Working pressure

of R-32 is higher than R410A, So failure to use the

dedicated tools and piping materials may cause rupture

or injury. Furthermore, it may cause serious accidents

such as water leakage, electric shock or fire.

• Servicing shall be performed as recommended by the

manufacturer. In case other skilled persons are joined

for servicing, it shall be carried out under supervision

of the person who is competent in handling flammable

refrigerants.

• For servicing the units containing flammable

refrigerants, safety checks are required to minimise the

risk of ignition. R-32 is slightly more flammable than

R410A hence additional precautions are required when

dealing with it.

• Servicing shall be performed following the controlled

procedure to minimize the risk of flammable

refrigerant or gases.

• Do not install where there is a risk of combustible gas

leakage.

• Do not place heat sources.

• Be cautious not to generate a spark as follows:

– Do not remove the fuses with power on.

DB68-13503A-01_IM_CAC R-32 WindFree1_4way_EA_EN_.indd 5DB68-13503A-01_IM_CAC R-32 WindFree1_4way_EA_EN_.indd 5 2025-04-08 오전 8:53:182025-04-08 오전 8:53:18

Bekijk gratis de handleiding van Samsung AC035FE1DKF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.