Samsung AC035FE1DKF handleiding

Airco

Samsung

46 pagina's

PDF beschikbaar

Handleiding

English

Installation Procedure

• 1) SEG4

By SEG4 setting, Minimizing fan operation when thermostat is off.

– Fan stops or operates Ultra low in Cooling when thermostat is off.

• 2) SEG6

If you set the value to 0, ‘Standard installation’ mode is activated. If you set it to 1, ‘High-ceiling’ mode is activated.

Model name

Supported installation height

Standard installation mode (Disuse: 0) High-ceiling mode (Compensate for RPM: 1)

AC140FE4DKF/EA, AC160FE4DKF/EA 5.5m↓ Options cannot be set

AC100FE4DKF/EA, AC120FE4DKF/EA 3.2m↓ 4.2m↓

AC052FE4DKF/EA, AC071FE4DKF/EA 2.7m 3.5m↓

• 3) SEG8

Drain pump: The Drain pump option is automatically set to [Used with 3minute delay], even if you set it to [Disuse].

Emergency Stop: If you set Emergency Stop to [Use], it is not possible to use the ETO or On/Off Control feature through

External Control (SEG14).

• 4) SEG18

If you set the Maximum filter usage time option to a value other than 2 and 6, it is automatically set to 2 (1000 hours).

When a purification panel is used, the time in parentheses is used.

• 5) SEG20

If you set the Individual control with remote control option to a value other than 0 to 4, it is automatically set to 0 (Indoor 1)

• 6) SEG21

1WAY CST is set to 2 ℃ and 4WAY CST is set to 5 ℃, even if ‘0’ is selected.

• 7) SEG23

Soft Off: The indoor unit turns off its operation at the indicated time in the table for Installation Option after its final motion

detection. But, it turns on again if the MDS detects motion.

Hard Off: Designated time after SOFT OFF, it cannot turn on automatically when it detects motion. Users should control to

turn on the indoor unit with remote control, etc.

Changing the addresses and options individually

When you want to change the value of a specific option, refer to the following table and follow the steps in Common steps for

setting the addresses and options on page 33.

Option SEG1 SEG2 SEG3 SEG4 SEG5 SEG6

Function Page Mode Option mode to change

Tens position of the

option number

Units position of the

option number

New value

Indication

and details

Indication Details Indication Details Indication Details Indication Details Indication Details Indication Details

0 D

Option

type

0 to F

Tens

position

value

0 to 9

Units

position

value

0 to 9 New value 0 to F

Example: Changing the Buzzer control (SEG17) option of the installation options to 1 disuse.

Option SEG1 SEG2 SEG3 SEG4 SEG5 SEG6

Function Page Mode Option mode to change

Tens position of the

option number

Units position of the

option number

New value

Indication 0 D 2 1 7 1

DB68-13503A-01_IM_CAC R-32 WindFree1_4way_EA_EN_.indd 43DB68-13503A-01_IM_CAC R-32 WindFree1_4way_EA_EN_.indd 43 2025-04-08 오전 8:53:272025-04-08 오전 8:53:27

Bekijk gratis de handleiding van Samsung AC035FE1DKF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.