Handleiding
Je bekijkt pagina 29 van 34
29
English
Installation Procedure
7 Setting outdoor unit option switch and address manually
a Setting the option
• Press and hold K2 to enter the option setting.
(Only available when the operation is stopped)
– If you enter the option setting, display will
show the following.
– Seg 1 and Seg 2 will display the number for
selected option.
– Seg 3 and Seg 4 will display the number for set
value of the selected option.
• If you have selected desired option, you can shortly
press the K2 switch to adjust the value of the Seg 3,
Seg 4 and change the function for the selected option.
Example)
Example)
• After selecting the function for options, press and
hold the K2 switch for 2 seconds. Edited value of
the option will be saved when entire segments
blinks and tracking mode begins.
Option item
Input
unit
SEG1 SEG2 SEG3 SEG4 Function
Channel
address
Main 0 0
AU
Automatic setting
(Factory default)
00~15 Manual setting
Snow
accumulation
prevention
control
Main 0 1
00
Disabled (Factory
default)
0 1 Enabled
Option item
Input
unit
SEG1 SEG2 SEG3 SEG4 Function
Step for
Silence mode
Main 0 2
00
Disabled (Factory
default)
01 Step1
02 Step2
03 Step3
Type of
Silence mode
Main 0 3
00
Automatic Silence
mode (Factory default)
0 1 Manual Silence mode
Not
applicable
Main 0 4
0 0 Not applicable
0 1 Not applicable
Not
applicable
Main 0 5
0 0 Not applicable
0 1 Not applicable
Current
restriction
θɇϩʪ࣑ࠞ
Main 0 6
00
100% (Factory default)
01 95%
02 90%
03 85%
04 80%
05 75%
06 70%
07 65%
08 60%
09 55%
10 50%
1 1 100%
• 1) Current restriction rate : When restriction
option is set, cooling and heating performance
may decrease.
CAUTION
• Edited option will not be saved if you do not end the
option setting as explained in above instruction.
࢘Ǯ˵ʪцͱЇɇθʪϑʪϩϩ˝ϩ˵ʪͱΧϩͱࡡцͱЇɇцΧθʪϑϑɇʒ
hold the K1 button to reset the value to previous setting.
࢘Ã˙цͱЇиɇϩϩͱθʪϑϩͱθʪϩ˵ʪϑʪϩϩ˝ϩͱ˙ɇʀϩͱθцʒʪ˙ɇЇϩࡡ
press and hold the K4 button while you are in the option
setting mode.
– If you press and hold the K4 button, setting will be
restored to factory default but it doesn’t mean that
restored setting is saved. Press and hold the K2
button. When the segments shows that tracking
mode is in progress, setting will be saved.
ki]_TW`ZZ`hTWYptwhjG⢰㫴G㐘㞬ὤG㢨㬅䏬䑀䇘㏘䇸pxluUGGGY` YWYWTXYTW`GGG㝘㤸GXXa[`a[Z
Bekijk gratis de handleiding van Samsung AC024TXQREH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Samsung |
| Model | AC024TXQREH |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 5383 MB |
