Handleiding
Je bekijkt pagina 17 van 32
17
English
Installation Procedure
Step 5 Connecting the refrigerant pipe
Items
Outdoor unit
models
Main pipe
(L1)
đɇу˵ʪ˝˵ϩʒ˙˙ʪθʪʀʪ
between outdoor and
indoor units (h1)
Maximum
allowable
length
AC024TXADKC 50 30
AC036TXADKC 50 30
AC048TXADKC 75 30
AC054TXADKC 75 30
n=1
Outdoor
L1
h1
Indoor Unit
indoor
• Temper grade and minimum thickness of the refrigerant pipe
Outer diameter
[mm]
Minimum thickness
[mm]
Temper grade
ø 6.35 0.7
C1220T-O
ø 9.52 0.7
ø 12.70 0.8
ø 15.88 1.0
ø 15.88 0.8
C1220T-1/2H OR
C1220T-H
ø 19.05 0.9
ø 22.23 0.9
CAUTION
• Be sure to use C1220T-1/2H (Semi-hard) pipe for more
than Ø19.05 mm. If you use C1220T-O (Soft) pipe for Ø19.05
mm, the pipe may be broken, which can result in an injury.
Block the part.
A
Make at least one round:
It will reduce noise and vibration
• The appearance of the unit may be different from the
diagram depending on the model.
CAUTION
Pipe outlet
• Cut the pipe outlet to the exact pipe size. In addition,
remove foreign substances and burrs around the outlet.
• ťʪθ˙ͱθʀЇϩϩ˝иϩ˵ͱцɇʀЇϩϩʪθ࣑ʪуΧΧʪθ࣒ɇʒ
never tap with a hammer near the pipe outlet.
Otherwise, it may cause product damage such as
warping of the cabinet.
• After connecting the pipes with pipe outlet, plug the
space around the pipes.
• After connecting the pipes, proceed exactly as directed in
the guide to prevent interference with the internal parts.
• Tighten the nuts to the specified torques. If overtightened,
the nuts could be broken so refrigerant may leak.
• Protect or enclose refrigerant tubing to avoid
mechanical damage.
• After installing pipes, block the unused knock hole
to prevent small animal from entering. However, the
radiant heat hole(A) should be able to intake air.
Step 6 Optional: Cutting and flaring
the pipes
1 Make sure that you have the required tools available.
࣑ΧΧʪʀЇϩϩʪθࡥθʪɇʪθࡥѤɇθ˝ϩͱͱࡥɇʒΧΧʪ˵ͱʒʪθ࣒
2 If you wish to shorten the pipes, cut it with a pipe
cutter, taking care to ensure that the cut edge remains
at a 90° angle with the side of the pipe. Refer to the
illustrations below for examples of edges cut correctly
and incorrectly.
Pipe cutter
90°
Pipe Oblique Rough Burr
Bekijk gratis de handleiding van Samsung AC024TXADKC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Samsung |
| Model | AC024TXADKC |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 4902 MB |
