Handleiding
Je bekijkt pagina 16 van 18
16
Cleaning and Maintaining
English
Cleaning and Maintenance
Problem Solution
The air is not cool or
warm enough.
• In the Cool mode, cool air does not come out if the set temperature is higher
than the current temperature.
– AR-EH0**, AR-EC0** remote control: Press the Temperature button
repeatedly until the set temperature (minimum: 64℉(18℃)) is set to lower
than the current temperature.
– AR-KH0** remote control: Press the Temperature button on the remote
control. Then rotate the Wheel until the set temperature
(minimum: 64℉(18℃)) is set to lower than the current temperature.
• In the Heat mode, warm air does not come out if the set temperature is lower
than the current temperature.
– AR-EH0**, AR-EC0** remote control: Press the Temperature button
repeatedly until the set temperature (maximum: 86℉(30℃)) is set to
higher than the current temperature.
– AR-KH0** remote control: Press the Temperature button on the remote
control. Then rotate the Wheel until the set temperature
(maximum: 86℉(30℃)) is set to higher than the current temperature.
• Both cooling and heating do not operate in the Fan mode. Select the Cool,
Heat, Auto, or Dry mode.
• Check whether the air lter is blocked with dirt. A dusty lter may decrease the
cooling and heating efciencies. Clean the air lter frequently.
• If a cover is on the outdoor unit or any obstacle is present near the outdoor
unit, remove them.
• Install the outdoor unit in a well-ventilated place. Avoiding places exposed to
direct sunlight or close to a heating appliance.
• Place a sunscreen over the outdoor unit to protect it from direct sunlight.
• If the indoor unit is installed in a place exposed to direct sunlight, pull the
curtains on the windows.
• Close the windows and doors to maximize the cooling and heating efciencies.
• If the Cool mode is stopped and then started immediately, cool air comes out
after about 3 minutes to protect the compressor of the outdoor unit.
• When the Heat mode is started, warm air does not come out immediately to
prevent cool air from coming out at the beginning.
• If the refrigerant pipe is too long, the cooling and heating efciencies may be
decreased. Avoid exceeding the maximum pipe length.
DB68-11306A-00_IB_CAC Universal 360_AA_EN.indd 16DB68-11306A-00_IB_CAC Universal 360_AA_EN.indd 16 2021-09-03 오전 8:52:422021-09-03 오전 8:52:42
Bekijk gratis de handleiding van Samsung AC024BN6DCH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Samsung |
| Model | AC024BN6DCH |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 4028 MB |
