Handleiding
Je bekijkt pagina 10 van 40
10
Installation Procedure
English
Installation Procedure
Connecting wire conduits
When connecting cables between the indoor unit and the
outdoor unit, use conduits to protect the cables.
1 Drill holes on the conduit plate in accordance with
their use and quantity.
• AC018BXADCH, AC018/024BXSCCC
– Drill conduit holes on the side cabinet. (knock
out holes)
Conduit Holes
• AC024/030/036/042/048BXADCH,
AC030/036BXSCCC, AC030/036BXSCCH
– Use a nipper to remove conduit holes from the
lower part of the cabinet.
(Do not remove it by hammering.)
Conduit Holes
2 Insert the cables through the conduits, and then fix the
conduits to the conduit plate with the lock nuts.
3 Apply silicone to the end of the hose to prevent rain
from entering the hose.
Silicone
Conduit inserted into the outdoor unit
4 Connect the cables to the outdoor units.
For how to connect the cables, refer to the next page.
5 Attach the conduit plate to the product.
Air conditioning system examples
When using earth leakage circuit breaker (ELCB) for a
single phase
Communication cable
Indoor Unit
Main power
cable
MCCB
1
Outdoor-to-indoor power cable
Outdoor Unit
Earthing
ELB
ELCB
1
OR
࢘Ɵ˵ʪɇΧΧʪɇθɇʀʪͱ˙ϩ˵ʪЇϩɇцɵʪʒ˙˙ʪθʪϩ˙θͱϩ˵ʪ
picture depending on the model.
CAUTION
• If the outdoor unit is installed in a location vulnerable
to an electric leak or submergence, make sure to
install an ELCB.
• AC018/024BXADCH, AC030/036BXSCCH: ELCB must
be installed since this product is equipped with a base
heater.
ki]_TXXY^[hTWZptjhjG|GvhhluUGGGXW YWYYTW_TYZGGG㝘㤸G_a[XaX]
Bekijk gratis de handleiding van Samsung AC018BXADCH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Samsung |
| Model | AC018BXADCH |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 6592 MB |
