Handleiding
Je bekijkt pagina 12 van 48
12
CAUTION: Do not put thawed food back in the freezer.
Auto cooking function
The microwave has a built-in setting for common food items. With the LED display flashing, turn the control dial in a clockwise direction to cycle through ‘A.1–A.8’.
Display Food type Method
A.1 Auto reheat Suitable for reheating food.
3 weight options: 200 g, 400 g, 600 g
A.2 Vegetable Suitable for heating vegetables.
3 weight options: 200 g, 300 g, 400 g
A.3 Fish Suitable for heating fish.
3 weight options: 250 g, 350 g, 450 g
A.4 Meat Suitable for heating meat.
3 weight options: 250 g, 350 g, 450 g
A.5 Pasta Suitable for cooking pasta.
2 options:
50 g with 450 ml of cold water
100 g with 800 ml of cold water
A.6 Potato Suitable for heating potatoes.
3 weight options: 200 g, 400 g, 600 g
A.7 Pizza Suitable for heating pizza.
2 weight options: 200 g, 400 g
A.8 Soup Suitable for heating soup.
2 liquid quantities: 200 ml, 400 ml
CAUTION: The starting temperature of the food should be 20–25 ºC.
Higher or lower temperatures will require an increase or decrease in cooking
time. The temperature, weight and shape of food will largely influence the
cooking process. If ingredients used dier from the options above, adjust
the cooking time.
Example: To heat 450 g of meat.
STEP 1: Turn the control dial in a clockwise direction to select the cooking function. The LED display will show ‘A.4’. Press ‘ ’ to select.
STEP 2: Turn the control dial to set the weight. The LED display will show ‘450’.
STEP 3: Press ‘
’ to start cooking. The LED display will show the remaining cooking time.
Multi-sequence cooking function
Settings can be customised in order to achieve the best cooking results.
Example: To set a cooking programme to defrost for 5 minutes, then P80 for 3 minutes.
STEP 1: Press ‘
’ twice to select defrost by time mode. The LED display will show ‘dEF.2’
STEP 2: Turn the control dial to set the cooking time. The LED display will show ‘5:00’.
STEP 3: Select the desired power setting by pressing ‘ ’ and use the control dial to cycle through the presets. The LED display will show ‘P80’; press ‘ ’ to select.
STEP 4: Turn the control dial to set the cooking time. The LED display will show ‘3:00’.
STEP 5: Press ‘
’ to start cooking. When the first cooking programme has finished, the next one will start automatically.
NOTE: A maximum of two cooking sequences can be set at one time. When selecting the defrost programme as one of the sequences,
this should always be the first sequence. The microwave will beep when one function has ended.
Child lock function
This feature is ideal for locking the control panel when cleaning or to prevent children from using the microwave unsupervised. All buttons are rendered inoperable
when the child lock function is used.
STEP 1: Press and hold ‘
’ for approx. 3 seconds to lock.
STEP 2: Press and hold ‘
’ for approx. 3 seconds again to unlock.
Storage
Check that the microwave is cool, clean and dry before storing in a cool, dry place.
Never wrap the cord tightly around the microwave wrap it loosely to avoid causing damage.
Bekijk gratis de handleiding van Salter Toronto EK5932WHT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Salter |
| Model | Toronto EK5932WHT |
| Categorie | Magnetron |
| Taal | Nederlands |
| Grootte | 4775 MB |