Saivod LST 1281 handleiding

Handleiding

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152/ 52

Afdrukken

Je bekijkt pagina 13 van 52

13

EN

Starting the programme

PressStart/Pausebuttontostarttheprogramme.

Programmefollow-uplightshowingthestartupof

the programme will turn on.

C

 Ifnoprogrammeisstartedornokeyis

pressed within 1 minute during programme

selection process, the machine will switch

to Pause mode and the illumination level of

the temperature, speed and loading door

indicatorlightswilldecrease.Otherindicator

lightsandindicatorswillturnoff.Oncethe

ProgrammeSelectionknobisrotatedor

anybuttonispressed,indicatorlightsand

indicators will turn on again.

Child Lock

UseChildLockfunctiontopreventchildrenfrom

tampering with the machine. Thus you can avoid

any changes in a running programme.

C

 IftheProgrammeSelectionknobisturned

when the Child Lock is active, "Con" appears

on the display. The Child Lock does not

allow any change in the programmes and the

selected temperature, speed and auxiliary

functions.

C

Even if another programme is selected with

theProgrammeSelectionknobwhiletheChild

Lock is active, previously selected programme

will continue running.

To activate the Child Lock:

Press and hold 1

st

and 2

nd

Auxiliary Function

buttonsfor3seconds.Thelightsonthe1

st

and

2

nd

AuxiliaryFunctionbuttonswillflash,and

"C03", "C02", "C01" will appear on the display

respectivelywhileyoukeepthebuttonspressed

for 3 seconds. Then, "Con" will appear on the

display indicating that the Child Lock is activated.

IfyoupressanybuttonorturntheProgramme

SelectionknobwhentheChildLockisactive,

same phrase will appear on the display. The lights

onthe1stand2ndauxiliaryfunctionbuttonsthat

areusedtodeactivatetheChildLockwillblink3

times.

To deactivate the Child Lock:

Press and hold 1

st

and 2

nd

auxiliary function

buttonsfor3secondswhileanyprogrammeis

running. The lights on the 1

st

and 2

nd

Auxiliary

Functionbuttonswillflash,and"C03","C02",

"C01" will appear on the display respectively while

youkeepthebuttonspressedfor3seconds.

Then,"COFF"willappearonthedisplayindicating

that the Child Lock is deactivated.

C

 Inadditiontothemethodabove,todeactivate

the Child Lock, switch the Programme

SelectionknobtoOn/Offpositionwhenno

programme is running, and select another

programme.

C

Child Lock is not deactivated after power

failures or when the machine is unplugged.

Progress of programme

Progressofarunningprogrammecanbefollowed

fromtheProgrammeFollow-upindicator.At

thebeginningofeveryprogrammestep,the

relevant indicator light will turn on and light of the

completed step will turn off.

You can change the auxiliary functions, speed

and temperature settings without stopping the

programme flow while the programme is running.

To do this, the change you are going to make must

beinastepaftertherunningprogrammestep.If

thechangeisnotcompatible,relevantlightswill

flash for 3 times.

C

 Ifthemachinedoesnotpasstothespinning

step,RinseHoldfunctionmightbeactive

ortheautomaticunbalancedloaddetection

systemmightbeactivatedduetothe

unbalanceddistributionofthelaundryinthe

machine.

Loading door lock

There is a locking system on the loading door of

the machine that prevents opening of the door in

caseswhenthewaterlevelisunsuitable.

Loading door light will start flashing when the

machine is switched to Pause mode. Machine

checksthelevelofthewaterinside.Ifthelevelis

suitable,LoadingDoorlightilluminatessteadily

within1-2minutesandtheloadingdoorcanbe

opened.

Ifthelevelisunsuitable,LoadingDoorlightturns

offandtheloadingdoorcannotbeopened.If

youareobligedtoopentheLoadingDoorwhile

theLoadingDoorlightisoff,youhavetocancel

the current programme; see "Canceling the

programme".

Changing the selections after

programme has started

Switching the machine to pause mode

PresstheStart/Pausebuttontoswitchthe

machine to pause mode while a programme is

running. The light of the step which the machine

isinstartsflashingintheProgrammeFollow-up

indicatortoshowthatthemachinehasbeen

switched to the pause mode.

Also,whentheloadingdoorisreadytobeopened,

LoadingDoorlightwillalsoilluminatecontinuously

in addition to the programme step light.

Changing the speed and temperature settings

for auxiliary functions

Dependingonthesteptheprogrammehas

reached, you may cancel or activate the auxiliary

functions; see, "Auxiliary function selection".

You may also change the speed and temperature

settings; see, "Spin speed selection" and

"Temperature selection".

C

 Ifnochangeisallowed,therelevantlightwill

flash for 3 times.

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152/ 52

Bekijk gratis de handleiding van Saivod LST 1281, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Gerelateerde producten van Saivod (Wasmachine)

Handleiding bekijken

Saivod Exclusive 1000 Vario

Wasmachine - handleiding

Handleiding bekijken

Saivod Top Line 1103 S

Wasmachine - handleiding

Handleiding bekijken

Saivod LST 1260

Wasmachine - handleiding

Handleiding bekijken

Saivod LS 1065

Wasmachine - handleiding

Handleiding bekijken

Saivod LST 1263

Wasmachine - handleiding

Handleiding bekijken

Saivod Veleta 450

Wasmachine - handleiding

Handleiding bekijken

Saivod Especial 600

Wasmachine - handleiding

Handleiding bekijken

Saivod Top Line 803

Wasmachine - handleiding

Andere merken in Wasmachine