Saivod LST 1055 handleiding

Handleiding

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960/ 60

Afdrukken

Je bekijkt pagina 15 van 60

15 / EN

Washing Machine / User’s Manual

To deactivate the Child Lock:

Pressandhold1stand2ndauxiliaryfunctionbuttonsfor3

seconds while any programme is running. The lights on the

1stand2ndAuxiliaryFunctionbuttonswillflashwhileyou

keepthebuttonspressedfor3seconds.

C

Inadditiontothemethodabove,todeactivatetheChild

Lock,switchtheProgrammeSelectionknobtoOn/

Offpositionwhennoprogrammeisrunning,andselect

another programme.

C

When the power is restored after a power failure or after

your machine is unplugged and plugged in again, the

ChildLockwillnotbedeactivatedwhenthemachine

resumes operating.

4.13 Progress of programme

Progressofarunningprogrammecanbefollowedfromthe

ProgrammeFollow-upindicator.Atthebeginningofevery

programme step, the relevant indicator light will turn on and

light of the completed step will turn off.

Youcanchangetheauxiliaryfunctions,speedand

temperature settings without stopping the programme flow

while the programme is running. To do this, the change

youaregoingtomakemustbeinastepaftertherunning

programmestep.Ifthechangeisnotcompatible,relevant

lightswillflashfor3times.

C

Ifthemachinedoesnotpasstothespinningstep,

RinseHoldfunctionmightbeactiveortheautomatic

unbalancedloaddetectionsystemmightbeactivated

duetotheunbalanceddistributionofthelaundryinthe

machine.

4.14 Loading door lock

There is a locking system on the loading door of the

machine that prevents opening of the door in cases when

thewaterlevelisunsuitable.

Loading door light will start flashing when the machine

isswitchedtoPausemode.Machinechecksthelevelof

thewaterinside.Ifthelevelissuitable,LoadingDoorlight

illuminates steadily within 1-2 minutes and the loading door

canbeopened.

Ifthelevelisunsuitable,LoadingDoorlightturnsoffandthe

loadingdoorcannotbeopened.Ifyouareobligedtoopen

theLoadingDoorwhiletheLoadingDoorlightisoff,you

havetocancelthecurrentprogramme;see“Cancelingthe

programme”.

Changing the selections after

programme has started

Switching the machine to pause mode

PresstheStart/Pausebuttontoswitchthemachineto

pause mode while a programme is running. The light of

the step which the machine is in starts flashing in the

ProgrammeFollow-upindicatortoshowthatthemachine

hasbeenswitchedtothepausemode.

Also,whentheloadingdoorisreadytobeopened,Loading

Doorlightwillalsoilluminatecontinuouslyinadditiontothe

programme step light.

Changing the speed and temperature settings for

auxiliary functions

Dependingonthesteptheprogrammehasreached,you

maycanceloractivatetheauxiliaryfunctions;see,“Auxiliary

functionselection”.

You may also change the speed and temperature settings;

see,“Spinspeedselection”and“Temperatureselection”.

C

Ifnochangeisallowed,therelevantlightwillflashfor

3times.

4.15 Adding or taking out laundry

PresstheStart/Pausebuttontoswitchthemachineto

pause mode. The programme follow-up light of the relevant

step during which the machine was switched into the pause

modewillflash.WaituntiltheLoadingDoorcanbeopened.

OpentheLoadingDoorandaddortakeoutthelaundry.

ClosetheLoadingDoor.Makechangesinauxiliaryfunctions,

temperatureandspeedsettingsifnecessary.PressStart/

Pausebuttontostartthemachine.

4.16 Canceling the programme

Tocanceltheprogramme,turntheProgrammeSelection

knobtoselectanotherprogramme.Previousprogramme

willbecanceled.End/Cancellightwillflashcontinuouslyto

notifythattheprogrammehasbeencanceled.

Your machine will end the programme when you turn the

ProgrammeSelectionknob;however,itdoesnotdrainthe

water inside. When you select and start a new programme,

the newly selected programme will start depending on the

stepthepreviousprogrammewascanceledin.Forexample,

it may take in additional water or continue to wash with the

water inside.

C

Dependingonthestepwheretheprogrammewas

canceled in, you may have to put detergent and softener

again for the programme you have selected anew.

4.17 Your machine is equipped with a “Standby

Mode”

Incaseofnotstartinganyprogrammeorwaitingwithout

making any other operation when the machine is turned

onbyOn/Offbuttonandwhileitisinselectionsteporif

nootheroperationisperformedapproximately2minutes

after the programme you selected has come to an end, your

machine will automatically switch to energy saving mode.

Displaybrightnesswilldecrease.Incaseofrotatingthe

ProgrammeSelectionknoborpressinganybutton,lightswill

restore to their previous condition. This is not a fault.

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960/ 60

Bekijk gratis de handleiding van Saivod LST 1055, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Gerelateerde producten van Saivod (Wasmachine)

Handleiding bekijken

Saivod Exclusive 1000 Vario

Wasmachine - handleiding

Handleiding bekijken

Saivod Top Line 1103 S

Wasmachine - handleiding

Handleiding bekijken

Saivod LST 1260

Wasmachine - handleiding

Handleiding bekijken

Saivod LS 1065

Wasmachine - handleiding

Handleiding bekijken

Saivod LST 1263

Wasmachine - handleiding

Handleiding bekijken

Saivod Veleta 450

Wasmachine - handleiding

Handleiding bekijken

Saivod Especial 600

Wasmachine - handleiding

Handleiding bekijken

Saivod Top Line 803

Wasmachine - handleiding

Andere merken in Wasmachine