Sagitter J-TUBE X1 handleiding
Handleiding
Je bekijkt pagina 29 van 48
29
4. – BATTERY CHARGE
4.1 - CHARGE WITH EXTERNAL ADAPTER
- Connect the projector to the mains with the external adapter included
- The standard time for battery charge when the level is 5%, is approximately 5 hours with
projector OFF
- During the charge, the battery icon (visible on the display) will show the level of the charge.
When the charge is finished, the icon will be totally green:
4.2 - CHARGE WITH RIGID BAG (SG JTUBEX1BAG sold separately)
- DURING THE COMPLETE PROCESS OF BATTERIES CHARGE THE UPPER COVER OF THE RIGID
BAG MUST BE ALWAYS OPEN
- DURING THE COMPLETE PROCESS OF BATTERIES CHARGE THE PROJECTORS MUST BE
ALWAYS OFF.
- WARNING: VERY HOT DEVICE. MAX 80°C ON THE SURFACE OF THE CHARGING BOX UNDER
THE CHARGING PROCESS OF THE BATTERIES. AFTER THE COMPLETE CHARGE, WAIT
MINIMUM 30 MINUTES BEFORE CLOSE THE BAG COVER, FOR ALLOWING THE CORRECT
COOLING OF THE POWER SUPPLY
For correct use of the battery it is strongly recommended to:
- Charge the battery at least one time each month
- The minimum level of the charge must be not less than 5%
Bekijk gratis de handleiding van Sagitter J-TUBE X1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sagitter |
| Model | J-TUBE X1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7346 MB |
