Sagitter Faster 384 handleiding
Handleiding
Je bekijkt pagina 22 van 28
22
OPERATION
(1)
RECORD A SEQUENCES OF SCENES
BANK
RECORD
1
Enter in program mode (press and hold - little led blinks in the
display)
2
Select the desired Bank (1 - 30) (last 2 digits on the right on the
display)
3
Select one by one the scanners used in the step and configure one
by one (only ONE SCANNER BUTTON ON)
4
When the total configuration is finished, switch ON all the scanners
used
5
press ADD and after press SCENE 1. All the leds in the controller will
blink
6
repeat the points 3 - 4 - 5 maximum until SCENE 8 (8 scenes in each
Bank)
7
Repeat the points 2 -3 - 4 - 5 - 6 maximum until Bank 30
(2)
RECORD A SEQUENCES OF SCENES ONE CHASE this procedure ONLY
AFTER PROCEDURE (1)
CHASE
1
Enter in program mode (press and hold - little led blinks in the
display)
2
Select the chase where you want store the scenes (first digit on the
left on the display)
3
All the scanners buttons OFF
4
select the bank where is the desired scene
5
press the desired scene (between 1 and 8)
6
press ADD
7
repeat points 4 - 5 - 6 until finished the sequence in the chase (max
240 scenes)
Bekijk gratis de handleiding van Sagitter Faster 384, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sagitter |
| Model | Faster 384 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5286 MB |
