Handleiding
Je bekijkt pagina 33 van 43
Operation instruction
To start cooking
1. After power on,the buzzer beeps once,all the indicators
light up for 1 second then go out,indicating that the hob
has been enter to standby model.
2. Touch the ON/OFF switch,all the indicators
show "-" or "--".
3. Place a suitable pan on the cooking zone
that you wish to use. Make sure the bottom
of the pan and the surface of the cooking
or slide along the slider control,or just touch any point of
zone is clean.
4. Select a heat zone and setting by touching the "slider",
the slider.
•
The pots and pans must be placed precisely in the middle of
•
Cookware made by the following materials is not suitable:
pure stainless steel, aluminum or copper without a magnetic
base, glass,wood, porcelain, ceramic, and earthenware.
the cooking area.
The min
•
In some
cooking areas an internal diameter is indicated,with
a lighter outline, which advises the user to go to a smaller
cooking area,if available,with smaller diameter pan.
This is to obtain optimum performance and efficiency. You
can however use pans with smaller diameters than this limit.
Size of burner(diameter/mm)
imum cookware(diameter/mm)
180(right down or right up)
120
Flex zone 240 or 160x270
will automatically switch off.You will need to start again at
step 1.
b. You can modify the heat setting at any time during cooking.
a. If you don't set the power within 1 minute,the induction hob
c. If slide along the slider,power will vary from stage 1 to
stage 9.
or
GBGB
63
62
Bekijk gratis de handleiding van Saba TI70STD444SLB23, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Saba |
| Model | TI70STD444SLB23 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 6036 MB |
