Handleiding
Je bekijkt pagina 31 van 43
GB
• If the cable is damaged or needs replacing, this should be done
by an after-sales technician using the proper tools, so as to
avoid any accidents.
• The installer must ensure that the correct electrical connection
• If the appliance is being connected directly to the mains supply,
an omnipolar circuit-breaker must be installed with a minimum
gap of 3mm between the contacts.
has been made and that it complies with safety regulations.
• The cable must not be bent or compressed.
• The cable must be checked regularly and only replaced by a
proper qualified person.
Connecting the hob to the mains power supply
This hob must be connected to the mains power supply
only by a suitably qualified person. Before connecting the
hob to the mains power supply, check that:
• The domestic wiring system is suitable for the power
drawn by the hob.
• The voltage corresponds to the value given in the rating
plate.
This power supply cable must not touch any hot parts and
must be positioned so that its temperature will not
exceed 75℃ at any point.
Check with an electricial whether the domestic wiring
system is suitable without alterations.Any alterations
• The power supply cable sections can withstand the load
specified on the rating plate. To connect the hob to the
mains power supply, do not use adapters, reducers, or
branching devices, as they can cause overheating and
fire.
must only be made by a qualified electrician.
Locating the
• Fix the brackets on the left side and right side by screw.
Put the induction hob in the cut-out cabinet.
fixing brackets
GB
59
58
Bekijk gratis de handleiding van Saba TI70STD444SLB23, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Saba |
| Model | TI70STD444SLB23 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 6036 MB |
