Handleiding
Je bekijkt pagina 56 van 59
GB
25
Problem Solution
• Display is not on
• Check if the power supply works.
• Check if the mains plug is inserted.
• Check the selected programme .
• Press the
【
On/Off
】
button.
• “ ”is lighting
• Check the water container. If it's full, please pour out the
condensate water and restart the dryer.
• If the container is not full, please restart the dryer directly.
• If the “ ” icon is still lighting after you have finished the first two
steps, please call the service.
• “ ”is lighting • Clean the lint filter.
• Dryer does not start
• Connect the tumble dryer to the mains.
• Turn on the tumble dryer.
• Check the the door is closed.
• Check the programme is set.
• Press the
【
Start/Pause
】
button.
• Degree of dryness
was not reached or
drying time too long
• Clean lint filter and heat exchanger.
• Empty the water container.
• Check the drain hose.
• Check installation place is appropriate.
• Keep the air inlet clean.
• Use higher drying intensity level programme or time programme.
• There are humming
noises
• The compressor is operating. These noises are quite normal and
do not indicate a fault.
• The dryer switches
off at the end of the
programme
• The dryer switches off automatically for energy saving. This is not
an error but a normal function.
Warning!
If you cannot deal with the problems by yourself and need help:
• Press the
【
On/Off
】
button.
• Pull out the mains plug and call the service.
Bekijk gratis de handleiding van Saba DR8HPM23W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Saba |
| Model | DR8HPM23W |
| Categorie | Wasdroger |
| Taal | Nederlands |
| Grootte | 4089 MB |
