Ryobi R18HLTR38 handleiding
Handleiding
Je bekijkt pagina 17 van 20
PRODUCT SPECIFICATIONS
Cordless line trimmer
Model R18HLTR38 / R18HLTR14
Voltage 18V d.c.
No-load speed (high) 5200±10%/min
No-load speed (low) 4800±10%/min
Cutting capacity 33 cm / 38 cm
Cutting line diameter 2.0 mm
Weight without battery pack 3.88 kg
Weight with heaviest battery pack 5.05 kg
Cutting width 33 cm / 38 cm
Noise emission values determined according to IEC 60335-2-91
A-weighted sound pressure level L
pA
= 89.2 dB
Uncertainty K = 3.0 dB
A-weighted sound power level L
WA
= 100.5
Uncertainty K = 3.0 dB
Vibration total values determined according to IEC 60335-2-91
Vibration emission value
Front handle a
h
= 0.3 m/s²
Rear handle a
h
= 0.3 m/s²
Uncertainty K = 1.5 m/s²
Guaranteed sound power level L
WA
+ K
WA
104 dB (A)
BATTERY AND CHARGER
Model
R18HLTR14 R18HLTR38
Battery
pack
RB18L40A
Charger RC18115
Compatible
battery
packs
RB18L13, RB18L13Z, RB18L15,
RB18L15A, RB18L15B, RB1815C,
RB18L20, RB18L20A, RB1820C,
RB18L25, RB18L25A, RB18L30,
RB18L30A, RB18L40, RB18L40A,
RB1840C, RB1840X, RB18L50,
RB18L50A, RB18L60, RB18L60A,
RB18L90, RB18L90A
Compatible
chargers
BCL14183H, RC18627U, RC18150,
RC18150U, RC18120, RC18115,
RC18118C, BCL1814IV
*BCL1418IV is compatible for charging in vehicles with 12V d.c.
outlets.
REPLACEMENT PARTS
Replacement head RAC1214
Replacement bump knob 530455002
Replacement 2.0 mm trimming line PWFTL2050T
NOTE: Visit your local special orders desk or contact RYOBI
Customer Service for replacement parts.
WARNING! The declared vibration total values and the
declared noise emission values given in this instruction
manual have been measured in accordance with a
standardised test and may be used to compare one tool with
another. They may be used for a preliminary assessment
of exposure.
The declared vibration and noise emission values represent
the main applications of the tool. However, if the tool is used
for dierent applications, used with dierent accessories,
or poorly maintained, the vibration and noise emission
may dier. These conditions may signicantly increase the
exposure levels over the total working period.
An estimation of the level of exposure to vibration and noise
should take into account the times when the tool is turned o
or when it is running idle. These conditions may signicantly
reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator
from the eects of vibration and noise, such as maintaining
the tool and the accessories, keeping the hands warm (in
case of vibration), and organising work patterns.
Bekijk gratis de handleiding van Ryobi R18HLTR38, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ryobi |
| Model | R18HLTR38 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3165 MB |
