Russell Hobbs RH82BUFZ1E1W handleiding

36 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 11 van 36
11
Installation
This appliance can be installed as a built under unit only. The clearances shown
in the below drawing must be followed.
Avoid damaging the product during installation, positioning of the appliance
requires two people in order to avoid injuries or damage to the appliance.
Your appliance should not be located in direct sunlight or exposed to
continuous heat or extremes of temperature (e.g. next to a radiator or boiler). If
this is not feasible, then you should install an insulation plate between the
appliance and the adjacent heat source.
You should check whether there is an electrical socket available, which will be
accessible after your appliance is installed.
Place the appliance flatly and firmly on a solid base
Be sure to leave enough space for the opening of the door, to avoid damage to
the appliance or personal injury
The aperture size has to be a minimum of (H)820 x (W)600 x (D)550mm.
Tools Required: Torx headed screwdriver, flat headed screwdriver, pencil, right
angle measure, ruler, drill, span, hexagonal spanner or a socket driver and spirit
level.

Bekijk gratis de handleiding van Russell Hobbs RH82BUFZ1E1W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkRussell Hobbs
ModelRH82BUFZ1E1W
CategorieVriezer
TaalNederlands
Grootte4463 MB