Russell Hobbs Desire 22280-56 handleiding

Niet gecategoriseerd

Russell Hobbs

72 pagina's

PDF beschikbaar

Handleiding

Read the instructions, keep them safe, pass them on if you pass the appliance on. Remove all packaging

before use.

IMPORTANT SAFEGUARDS

Follow basic safety precautions, including:

This appliance can be used by persons with reduced physical, sensory or

mental capabilities or lack of experience and knowledge if they have been

supervised/instructed and understand the hazards involved.

Children must not use or play with the appliance.

Keep the appliance and cable out of reach of children.

C Misuse of the appliance may cause injury.

Unplug the appliance before assembly, disassembly, or cleaning.

Don’t leave the appliance unattended while plugged in.

If the cable is damaged, it must be replaced by the manufacturer, its

service agent, or someone similarly qualiﬁed, to avoid hazard.

b Do not use this appliance near bathtubs, showers, basins or other vessels containing water.

• Don’t use ﬁngers or cutlery to push food down the tube – only the pusher.

• Don’t use the appliance for any purpose other than those described in these instructions.

• Don’t operate the appliance if it’s damaged or malfunctions.

• Don’t run the motor continuously for more than 2 minutes, it may overheat. After 2 minutes switch

oﬀ for at least 2 minutes, to recover.

HOUSEHOLD USE ONLY

PARTS

1. Tab

2. Slots

3. Cutters

4. Slicer

5. Coarse grater

6. Fine grater

7. Ring nut

8. Bayonet ﬁtting

9. Cutter mount

10. Body

11. Tube

12. Guides

13. Pusher

14. Cap

15. Switch

16. Motor unit

` Dishwasher safe

ASSEMBLY

1. Switch the appliance oﬀ (O) and unplug it.

2. Choose the pair of cutters you need – slicer, coarse grater, ﬁne grater.

3. Stand the cutter mount upright on the work surface. Don’t try to ﬁt the cutters to the cutter mount

while holding it in the operating position or you might cut yourself.

4. Fit the tabs on the wide end of the cutter into the slots in the wide end of the cutter mount.

5. Press the tab on the narrow end of the cutter into the space in the narrow end of the cutter mount.

6. Turn the cutter mount, then ﬁt the second cutter.

7. Slide the cutter mount into the body.

8. Turn the ring nut 45° clockwise.

9. Push it on to the front of the body.

10. Turn it 45° anti-clockwise, to lock it in place.

Bekijk gratis de handleiding van Russell Hobbs Desire 22280-56, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.