Royal Sovereign ARP-914 handleiding
Handleiding
Je bekijkt pagina 7 van 32
INSTALLATION
Part 2: Exhaust Hose Installation
• The two exhaust duct connectors tighten on the ends of the exhaust duct (See Fig. 1).
• Slide the square side of the exhaust duct connector into the opening at back of the air
conditioner (See Fig. 2 and Fig. 3).
• The exhaust hose can extend up to approximately 59 in. (150 cm.).
Part 3: Window Seal Plate Installation
• The window seal plate can be installed horizontally or vertically. The window seal plate can fit in
windows with a minimum width of 23.5 in (60 cm.) and a maximum width of 59 in. (150 cm.).
• Open the window and place the window seal plate on the inside edge of the window.
• Adjust the window seal plate to the width of the window. Once secure, close the window.
• Connect the oval side of the exhaust duct connector to the window seal plate.
7
Bekijk gratis de handleiding van Royal Sovereign ARP-914, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Royal Sovereign |
| Model | ARP-914 |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 3164 MB |