Royal Catering RCPSU-700 handleiding

87 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 23 van 87
Disassemble the device and all its components and clean them before the first use.
3.3. Device use
Prep
aration for work
1. Ground the device housing, use the grounding terminal located on the
back of the griddle.
2. Con
nect the device to the power supply. The device beeps.
3. Pour water into the tank. Place the food intended for cooking, packed
in vacuum bags on the rack. Please note: Be careful not to overfill the
device when pouring water.
4. Make sure the vent on the cover is closed.
Ope
rating the device
1. Press the On/Off button on the display. The device beeps. The display will
activate, showing the current water temperature and the remaining operating
time.
2. If no button is pressed on the control panel within 5 seconds, the device
will start working in accordance with the last memory settings.
3. After reaching the set temperature, the device will beep and will start
counting down the pre-set operation time.
4. When this symbol
flashes on the display, the appliance is heating up
and the cooking process is active.
5. The display cyclically shows the current water temperature for approx. 10
seconds, then the set temperature for approx. 2 seconds.
6. Please note: Do not add water to the device while it is working. In order to
add water to the device, turn it off first.
7. The cover of the device has a vent to avoid hot steam ejection while
removing the cover. To avoid burns, the vent is best opened avoiding direct
contact with it. It is recommended to wear protective gloves and take
particular care when opening the vent and removing the cover.

Bekijk gratis de handleiding van Royal Catering RCPSU-700, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkRoyal Catering
ModelRCPSU-700
CategorieNiet gecategoriseerd
TaalNederlands
Grootte3259 MB