Royal Catering RCKV-200/39-S9 handleiding

Niet gecategoriseerd

Royal Catering

27 pagina's

PDF beschikbaar

Handleiding

Do not use for washing any caustic cleaners, such as

cleaning powders, agents with alcohol content, thinners,

diluents, etc., and do not allow water to enter the appliance

interior. Never immerse the appliance, cord or plug

in water or any other liquid. It is forbidden to clean the

device with a water jet. The interior of the device should be

cleaned with a disinfectant suitable for the food industry.

To clean, use a damp, soft cloth and then dry thoroughly.

Dry the surface with a soft, dry cloth. The following actions

should be taken if the machine is not used for a long

period of time: Disconnect the appliance completely from

the power supply and remove all food products from it.

Then wash the entire appliance with a damp, soft cloth

and mild cleaning agent, rinse with clean water and dry

thoroughly, for some time leave the door open, so that

the appliance will be completely dry. From time to time,

check that the cable is not damaged. Do not use the

appliance if the cable is damaged. A damaged cable must

be replaced by a service or a qualied electrician. In the

event of damage or malfunction, please contact your

dealer or our service. Maintenance and repair work must

be done only by qualied personnel using original spare

parts and accessories. Attempts to make repairs on your

own can lead to a direct threat to life or health, and will

void the warranty!

CHECK REGULARLY THE DEVICE

Check regularly that the device doesn t present any

damage. If there is any damage, please stop using the

device. Please contact your customer service to solve the

problem.

What to do in case of a problem?

Please contact your customer service and prepare following

information:

• Invoice number and serial number (the latter is to be

found on the technical plate on the device).

• If relevant, a picture of the damaged, broken or

defective part.

• It will be easier for your customer service clerk to

determine the source of the problem if you give

a detailed and precise description of the matter.

The more detailed your information, the better

the customer service will be able to answer your

problem rapidly and eciently!

CAUTION: Never open the device without the authorization

of your customer service. This can lead to a loss of warranty!

TROUBLESHOOTING

Problem Probable cause Action

The

appliance

turns on,

but the

temperature

is too high/

low

Condenser

blocked with

dust

Call your agent or

qualied technician

Appliance is

located near

a heat source

or air ow to

the condenser

is being inter-

rupted

Move the appliance

to a more suitable

location

Ambient

temperature is

too high

Increase ventilation

or move appliance

to a cooler position

Ambient

temperature is

too high

Increase ventilation

or move appliance

to a cooler position

Unsuitable

foodstus are

being stored in

the appliance

Remove any exces-

sive hot foodstus

or blockages to

the fan

Appliance is

overloaded

Reduce the amount

of food stored in

the appliance

The

appliance is

unusually

loud

Loose nut/

screw

Check and tighten

all nuts and screws

The appliance

has not been

installed in

a level or stab-

le position

Check installation

position and change

if necessary

5. Install the top panel onto the other glass panel

elements.

6. Insert rubber protectors to openings in glass panels

and screw tight to the rear and side panels the

elements which are to connect them to the upper

part of the panel and then screw the top panel.

DEVICE CONTROLLER OPERATION

Displaying settings. In service

programming mode – select

parameter and conform

changes.

Start manual defrost.

Scroll list of parameters (in

service programming mode)/

Increase set value

Scroll list of parameters (in

service programming mode)/

Decrease set value

BUTTON COMBINATIONS

Lock/unlock buttons

Initiate service programming

mode – ATTENTION! IT IS

RECOMMENDED NOT TO

INITIATE THE SERVICE MODE –

all the factory parameters were

set in this mode and changes

may result in incorrect device

operation.

Return to ambient temperature

display.

ON Active defrosting

Flashing Active dripping

ON Fan ON

Flashing Delayed ventilator activation

after defrosting

ON Unit of temperature

Flashing Programming mode

ON Unit of temperature

Flashing Programming mode

DISPLAYING SETTINGS:

1. Briey press the SET button and the current setting

will be displayed.

2. To return to the standard screen briey press SET or

wait for approximately 5 seconds.

CHANGING SETTINGS:

1. Press and hold down the SET button for

approximately 3 seconds

2. The current setting will be displayed and °C or °F

diode will ash.

3. Change the setting using or .

4. To accept changes press the SET button.

MANUAL DEFROST

Press and hold down the button for at least 5 seconds

– defrost will start and an appropriate message will appear

in the display.

ATTENTION: Manual defrost resets the automatic defrost

schedule. The next automatic defrost will start 4 hours after

manual defrost ends. ATTENTION! Do not use electrical

devices (such as a hair dryer) or open re to defrost the

device. Plastic elements of the interior may melt and

a spark or ame may ignite the fumes.

LOCKING BUTTONS:

Press and hold down the and buttons for at

least 3 seconds. „OF“ will be displayed – the buttons are

now locked.

UNLOCKING BUTTONS:

Press and hold down the and buttons for at

least 3 seconds. „on“ will be displayed – the buttons are

now active.

TRANSPORTATION AND STORAGE

During transport, the machine should be protected from

shaking, falling and turning upside down. Store it in

a properly ventilated place with dry air and without any

corrosive gas.

CLEANING AND MAINTENANCE

It is recommended to wash the appliance regularly. Before

start of cleaning of the appliance or before performance

of any repair or maintenance work, it is necessary to

disconnect the appliance from the power supply and wait

until it has cooled down.

Problem Probable cause Action

The

appliance

is not

working

The unit is not

switched on

Check the unit is

plugged in correctly

and switched on

Plug and lead

are damaged

Call your agent or

qualied technician

Fuse in the plug

has blown

Replace the fuse

Power supply Check power supply

Internal wiring

fault

Call your agent or

qualied technician

14 15

EN EN

SYMBOL MODE DESCRIPTION

ON Compressor is active

Flashing Prevention of short operation

periods activated

Rev. 22.06.2023 Rev. 22.06.2023

Bekijk gratis de handleiding van Royal Catering RCKV-200/39-S9, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.