Royal Catering RCFZ-560-1 handleiding
Handleiding
Je bekijkt pagina 7 van 23
3. Remove all documents and other accessories from
the inside of the appliance.
4. Install all additional components of the appliance.
5. Level the appliance.
6. Clean and dry the interior.
7. Close the cover / door of the appliance.
8. Connect the appliance plug to the socket.
9. Set the cooling power to the maximum.
10. Do not open the appliance for about 4-6 hours or
until the red light (Running) is o.
11. Insert frozen products into the freezer
12. If you need to freeze fresh food, it is necessary
to follow the instructions for freezing fresh food
contained in this document.
Do not store any glass bottles with liquids, because
they increase their volume during freezing and may be
damaged. Never store explosive substances in the freezer.
Height adjustment / levelling:
In order to adjust the height or level of the freezer, it is
necessary to unscrew or screw in the feet of the appliance.
Assembly of the lock:
1. Remove the tape covering the screw holes for the
catch.
2. Position the catch in the correct mounting position.
13. 3. Screw the catch with two screws.
The handle assembly:
1. Fix the handle on the door with 4 screws.
2. Insert the handle cover beginning from one side and
ending on the other side.
3. Push the cover into the holder.
The appliance is equipped with a lock which enables to
protect the freezer against opening.
Height adjustment of shelves:
1. Remove the shelf.
2. Remove the shelf support and set it to the desired
height.
3. Set the remaining supports.
4. Slide the shelf onto the support.
FREEZING OF FRESH FOOD
1. Place the packaged fresh food in the freezer, paying
attention so that it will not come in direct contact with
already frozen products because they may defrost
and shorten their shelf-life. It is recommended that
fresh food will be placed near the wall or bottom of the
freezer, in these places it is the coldest. Do not exceed
the allowed freezer food quantity for a given appliance
(X kg / 24h). Check this value in the technical data of the
appliance or on the rating plate.
2. Set the cooling power to the maximum.
3. After 24 hours it is necessary to change the location
of the frozen food so that it will be possible to freeze
other products.
4. Set the cooling power which will be appropriate for
lling of the freezer.
5. Not required for the RCFZ-459+, RCFZ-560+ models.
It is possible to check the temperature inside the
appliance, for example with a thermometer which
scale allows to measure temperatures lower than –
20°C. The temperature of food storage in the freezer
should be at least – 18°C.
SWITCHING ON THE APPLIANCE
1. Close the appliance door.
2. Connect the appliance plug to the power supply. The
appliance will start normal operation and the power
light will switch on but the cooling will start only
after setting a cooling power other than 0. (Setting
cooling power to 0 stops the cooling process, but it
does not turn o the appliance).
DESCRIPTION OF THE CONTROL PANEL
1. Green signal light (Power Indicator – signals power
supply connection and that the appliance is switched
on.
2. Red signal light (Running) – Indicates that the
interior temperature is higher than the set target
temperature. It is usually switched on in case of:
• The rst start up of the appliance
• Start after defrosting
• Filling the freezer with fresh products
3. Cooling power adjustment knob (0 – no cooling; 1
– light cooling; 7 – maximum cooling power)
1 2 3
SELECTION OF TEMPERATURE SETTINGS
In order to turn on: turn the temperature adjustment knob
on the right to the level (other than 0) which is required:
• minimum (light cooling)
• maximum (lowest temperature)
The temperature should be set depending on:
• ambient temperature
• quantity of stored food
• opening frequency
MAXIMUM FILLING HEIGHT OF THE FREEZER
Never ll the freezer until the edge being in contact with
the cover. Always keep the distance between the cover and
the frozen products.
Set the temperature adjustment knob depending on the
lling of the freezer.
DEFROSTING
Under normal conditions of use (3-4 openings per day), the
freezer should be defrosted once or twice a year (in case
of more frequent opening the freezer should be defrosted
more often).
The appliance must be defrosted especially when the
thickness of the ice layer on its walls will be about 5-7 mm.
Ice layers on the internal walls of the appliance reduce its
eciency.
Layers of ice can be scraped with a plastic scraper. Do not
use metal things to scrap ice from the appliance.
Warning! Never use electrical appliances to defrost freezers
(e.g. hair dryer) or open ames (e.g. candles). The plastic
parts of the interior can melt and the emanate vapours can
iname through sparks or a ame.
In order to defrost it is necessary to proceed as follows:
1. Make sure the appliance plug is removed from the
socket.
2. It is recommended to use a plastic bowl or other
sealed container to collect leaking water in the
course of defrosting.
3. Make sure that the hands are dry in the course of
performing subsequent activities in order to avoid
damages caused by a negative temperature (use of
gloves is recommended).
4. Remove the frozen products and make sure that the
water melting from them will not cause any danger
or damages. It is recommended to place them in
a sealed container.
5. Using a at tool, lever up and remove the stopper
from the bottom of the freezer.
6. Pull out manually the plug located in the front
bottom part of the freezer, provide a suitable
container for the water owing out.
7. It is recommended to scrape the thickest layers of
ice.
8. If necessary, defrosting can be accelerated by
inserting a dish with warm water dish (not boiling or
hot!) into the freezer.
9. Wait until the ice from the inside of the freezer is
melted, in the course of defrosting it is possible to
remove the water from the inside of the freezer with
a sponge.
10. Before using the appliance again, clean the inside of
the appliance.
11. Plug the holes (on the bottom of the freezer and in
its front bottom part) with stoppers.
12. Close the cover / door and connect the appliance to
the power supply.
13. Set the cooling power to the maximum.
14. Insert products to be frozen into the freezer.
15. After about 4-6 hours or when the red light
(„Running“) turns o, set the cooling power
appropriately to the lling of the freezer.
INTERIOR LIGHTING
When the freezer cover is open, the internal lighting of the
appliance automatically lights up automatically. When the
freezer cover is closed, the interior lighting of the appliance
goes out.
EXCHANGE OF INTERNAL LAMP
Replacement or repair of the lamp should be made by
a qualied specialist.
Before replacing the lamp and any maintenance work, it is
necessary to disconnect the plug of the appliance from the
socket. The lamp is located behind the transparent shield
on the cover of the appliance or – in case of the model.
If you need to replace the lamp, remove the cover screws,
remove the cover, replace the lamp with a new one with
the same parameters and then reinstall the cover with the
screws.
TRANSPORTATION AND STORAGE
During transport, the machine should be protected from
shaking, falling and turning upside down. Store it in
a properly ventilated place with dry air and without any
corrosive gas.
CLEANING AND MAINTENANCE
It is recommended to wash the freezer regularly.
Before start of cleaning of the appliance or before
performance of any repair or maintenance work, it is
necessary to disconnect the appliance from the power
supply and wait until it has cooled down.
Do not use for washing any caustic cleaners, such as
cleaning powders, agents with alcohol content, thinners,
diluents, etc., and do not allow water to enter the freezer
interior. Never immerse the appliance, cord or plug in water
or any other liquid. It is forbidden to clean the device with
a water jet. The interior of the device should be cleaned
with a disinfectant suitable for the food industry. To clean,
use a damp, soft cloth and then dry thoroughly. Dry the
surface with a soft, dry cloth. The following actions should
be taken if the machine is not used for a long period of
time: Disconnect the appliance completely from the power
supply and remove all food products from it. Then wash the
entire appliance with a damp, soft cloth and mild cleaning
agent, rinse with clean water and dry thoroughly, for some
time leave the door open, so that the appliance will be
completely dry. From time to time, check that the cable
is not damaged. Do not use the appliance if the cable is
damaged. A damaged cable must be replaced by a service
or a qualied electrician.
In the event of damage or malfunction, please contact your
dealer or our service. Maintenance and repair work must
be done only by qualied personnel using original spare
parts and accessories. Attempts to make repairs on your
own can lead to a direct threat to life or health, and will
void the warranty!
CHECK REGULARLY THE DEVICE
Regularly check the machine for signs of damage. If the
machine is damaged, please stop using it immediately and
contact your customer service to solve the problem.
What to do in case of a problem?
Please contact your customer service and prepare the
following information:
• Invoice number and serial number (the latter is to be
found on the technical plate on the device).
• If relevant, take a picture of the damaged, broken or
defective part.
• It will be easier for your customer service clerk to
determine the source of the problem if you give
a detailed and precise description of the matter. The
more detailed your information, the better customer
service will be able to solve your problem rapidly and
eciently!
CAUTION: Never open the device without the authorization
of your customer service. This can lead to a loss of warranty!
Store the unit in a dry, cool place, free from moisture and
direct exposure to sunlight.
DISPOSING OF USED DEVICES
Do not dispose of this device in municipal waste systems.
Hand it over to an electric and electrical device recycling
and collection point. Check the symbol on the product,
instruction manual and packaging. The plastics used to
construct the device can be recycled in accordance with
their markings. By choosing to recycle you are making
a signicant contribution to the protection of our
environment. Contact local authorities for information on
your local recycling facility.
EN
EN
12 13
Rev. 04.01.2021Rev. 04.01.2021
Bekijk gratis de handleiding van Royal Catering RCFZ-560-1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Royal Catering |
| Model | RCFZ-560-1 |
| Categorie | Vriezer |
| Taal | Nederlands |
| Grootte | 3561 MB |