Royal Catering RCBC-5V3 handleiding
Handleiding
Je bekijkt pagina 16 van 116
EN
Assembly/disassembly of the blocking partition
Unscrew the knob which secures the locking partition, then pull the partition out. When attaching it, make sure
that the partition is tilted downward and that it is fully inserted. Then fix it in place with the knob. When you have
finished, make sure that the knife blade passes smoothly through the slots in the partition - i.e. nothing grinds
against it or blocks it.
Assembly/disassembly and positioning of the dish
Open the dish cover, then turn the dish clockwise at an angle until it feels loose. Then lift it up a little and pull it out.
When refitting it, make sure that it snaps into the mount by turning it counterclockwise until it cannot be turned
any further.
Knife assembly/disassembly and setting
First, open the dish cover and, if necessary, remove the dish itself (see above). Block the knife shaft using your hand
or a tool. Unscrew the knife shaft holder and remove the knife components from its base. If it is necessary to set
the distance between the knife and the dish, use a tool to loosen the nut. The correct distance between the knife
blades and the disc should be equal to/ or greater than 2 mm. When properly installed, there should be no space
between the knife base and its main shaft.
3.4. Device use
Open the cover, make sure the blade is properly installed.
Put the products to be chopped in the bowl and do not exceed the capacity of the bowl.
Bekijk gratis de handleiding van Royal Catering RCBC-5V3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Royal Catering |
| Model | RCBC-5V3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 37570 MB |
