Rowenta X-Trem Power XL RO5545 handleiding

Stofzuiger

Rowenta

96 pagina's

PDF beschikbaar

Handleiding

1 • Fitting the elements onto the

appliance

lace the tube in the vacuum opening (fig. 1) and turn to

screw on. To withdraw the tube, turn in the opposite sense

nd pull.

- Fit the telescopic metal tube to the end of the handle until

you hear a 'click' (Fig.2) (to dislodge it, press the screwing

utton on the tube and pull)

- Fit the nozzle for all floor types (20*) to the end of the

telescopic metal tube (Fig.3)

• Adjust the telescopic metal tube to the desired length using

the telescopic system (Fig.4).

Fit the corresponding accessory to the end of the telescopic

metal tube or the handle:

- For rugs and carpets: use the multi-surface nozzle in the

retracted brush position or the Turbobrush* (fibres and

animal hairs).

- For smooth surfaces with crevices (such as tiled floors): use

the all-surface nozzle (20*) with the brush extended or, for

better results, use the smooth surface nozzle* (21B.a*)

without the removable brush.

- For fragile surfaces, such as parquet, it is recommended to

use the standard parquet nozzle (21A*) or the nozzle with line

of bristles (21B.b*).

- For corners and hidden spots: use the crevice nozzle*.

- For upholstery and delicate surfaces: use the upholstery

brush or nozzle*.

2 • Plugging in the power cord and

switching on the appliance

nwind the power cord completely, plug in your vacuum

cleaner and press the ON/OFF pedal (fig. 7).

ote: you can use your vacuum cleaner in the horizontal

position (sleigh) but also in vertical position, especially when

vacuuming stairs or curtains.

Adjust the vacuuming power:

⇨with the electronic power control switch (fig.8):

• Position (MIN) for vacuuming delicate fabrics

(curtains, textiles).

• Position (Medium) for daily vacuuming of all types of

surfaces that are not very dirty.

• Position (MAX) for vacuuming hard floors, rugs and

carpets in the case they are very dirty.

⇨with the mechanical power control of the handle. open the

regulation shutter slider to manually decrease the vacuuming

power and thus keep the nozzle from getting stuck to the

surface being vacuumed (fig.9) ex: sheer curtains, fragile

surfaces...

3 • Storing and transporting the

appliance

After use, switch off your vacuum cleaner by pressing the

ON/OFF pedal and unplug it (fig. 10). Rewind the power cord

by pressing the power cord rewind pedal (fig. 11).

In vertical position, place the nozzle in the parking position

(fig.12).

Thus you will be able to transport and store your vacuum

cleaner in the parking position (fig.13).

USE

IMPORTANT: Never use the vacuum cleaner without a

bag or without a filtration system in place (cassette).

WARNING: always switch off and disconnect your

vacuum cleaner before changing any accessories.

* According to model - These parts are specific to certain

models or they are accessories that can be purchased se-

parately.

N.B.: The nozzle for smooth surfaces with crevices

21B.a* is used to measure performance associated

with the energy label. This nozzle allows you to

optimise the dust-collection performance of your

appliance on smooth surfaces with crevices.

ERGONOMIC RECOMMENDATIONS

ERGO COMFORT accessories

improve user comfort during vacuuming.

To prevent bending over and to ensure upright

posture, make sure to:

1. Adjust the length of the ERGO COMFORT

telescopic metal tube to your bodily proportions

(fig.5).

2. Place your second hand in front of the ERGO

COMFORT handle (fig.6).

RO_ASPIRATEUR_XTREM POWER_RO55_744270-01_744270-01 14/04/14 15:37 Page10

Bekijk gratis de handleiding van Rowenta X-Trem Power XL RO5545, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.