Rowenta X-Plorer Serie 70 RR8497 Handleiding (128 Pagina's)

Handleiding

16 17

Flash the QR-Code above to know how to maintain the robot to keep its performance.

Always switch off the robot by pressing and holding the “Power” button for 5 seconds and

unplug the station before any manipulation.

Once a week, clean the sensors.

With a clean, soft and dry cloth, wipe the robot sensors (in front, top, back and bottom

of the robot), the laser window, the sensors and charging contacts of the station.

Wipe the two buttons on top of the robot.

Maintain the robot and its accessories Maintain the robot and its accessories

After each use, clean the dust box

When the robot returns to its station, separate the 2-in-1 dust bin and water tank from

the rest of the robot: press and hold its release button and pull it outwards. Press the

dust bin and water tank separation button to horizontally lift the dust bin and seperate

it from the water tank.

Open the dust bin and empty it into the bin, gently tap the dust bin to knock off dirt.

Close the dust box.

Note:

Thedustbinopeningmaynotopenorcloseproperlyifthereistoomuchdustin

the hinges. Please clean hinges with a clean, soft and dry cloth to remove dust.

EN EN

Bekijk gratis de handleiding van Rowenta X-Plorer Serie 70 RR8497, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.