Rowenta X-Plorer Serie 70 RR8477 Handleiding (128 Pagina's)

Handleiding

8 9

Install the robot

EN

Turn the station upside down. Remove the bottom cover of the docking station and

connect the adapter. Pay attention to arranging adapter connection wire to avoid being

wound during sweep. Put the bottom cover back.

Install the docking station on a hard and at oor. Avoid parquet, wooden oors and

carpet. Place the station in a clear space against a wall, with no stairs in front of the

station. Keep at least 0.5 m of clearance on either side and 1.5 m in front. Make sure

the chosen location is close to the Wi-Fi box or has good Wi-Fi signal strength. Keep

the area around the station clear from any object, reective surface, mirror, table and

chair. Keep the station away from direct sunlight. Plug the power cable. Make sure the

power cable remains against the wall.

1.5m

0.5m

Install the robot

Flash the QR-Code above to know how to install and connect the robot in video. Read

the following instructions for more detailed informations.

Remove all protections (protective lms) on the station and on the robot. Reverse the

robot, install the side brush by gently clipping it. The side brush is correctly installed

when you hear a click sound.

CLICK

EN

Bekijk gratis de handleiding van Rowenta X-Plorer Serie 70 RR8477, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.