Rowenta X-Plorer Serie 240 Ai RR9675 handleiding

Stofzuiger

Rowenta

32 pagina's

PDF beschikbaar

Handleiding

12 13

Pressthebutton«Start»tostartautomaticcleaning.Therobotwillscanthearea.It

willautomaticallysplittheroomintosmallzones,rstcleansinsidethezoneinazig

zag,andthencleanszoneedges.Therobotwillcleanallaccessiblearea,zonebyzone.

Pressthebutton«Start»atanytimetopausecleaningandpressitagaintoresume

cleaning.Iftherobotisonstandby,pressthebutton«Start»oncetowakeuptherobot

and a second time to start cleaning.

If you start the robot from the station, it will automatically return to its station at the end

of the cleaning session or if the battery level is too low. If the battery runs low during

the cleaning session, the robot will automatically return to its station to charge. After

charging, the robot will resume cleaning where it left off.

If the robot is not on its station when it starts cleaning, it will automatically return to its

starting point at the end of the cleaning session or if the battery level is too low.

Iftherobotdoesn’tstartwhenyoupressthebutton«Start»,thebatterylevelmaybe

too low, please charge the robot.

At the end of the cleaning session, the robot will automatically return to the station. But

ifyouwanttomanuallyendthecleaningsession,pressthe«Home»buttononceto

stop the robot at any time and press it again to send the robot back to the station. If the

robotisonstandby,pressthe«Home»buttononcetowakeuptherobotandasecond

timetosenditbacktothestation.Iftherobotfailstondthestation,manuallyplace

therobotinfrontofthestationandpressthe«Home»button.

Note: At the start of a cleaning session, the robot goes few meters away from the

stationandcomesback(relocationsequence).Duringthissequence,therobotreduces

themotorpowerandstopswatertankvibrating.Thisbehaviorisnormal.

To use the robot without the mopping function (“vacuum only” mode), install the

“vacuumonly”moduleatthebackoftherobot.Themoduleiscorrectlyinstalledwhen

youheara«click»sound.Pressthe«Start»buttonorusetheapptostartcleaning.

Keep the “vacuum only” module installed in the robot when you don’t use the mopping

function.The“vacuumonly”moduleisequippedwithchargingcontactstoallowthe

robot to dock to the station and to charge its battery.

The difference between the two tanks

Use the robot without the mopping function

(«vacuum only» mode)

CLICK

Toworkproperly,therobotalwaysneedsoneofthetwotanksinstalled:

ū Install the “vacuum only” module to use the robot in “vacuum only” mode (without

mopping function) ;

ū Or install the water tank to use the robot in “vacuum & mop” mode.

Bothtanksareequippedwithchargingcontactstoallowtherobottodocktoitsstation

and to charge its battery.

Warning: the robot will not charge if no tank is installed.

Use the robot without the app

Bekijk gratis de handleiding van Rowenta X-Plorer Serie 240 Ai RR9675, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.