Rowenta X-Force Flex 9.60 handleiding
Handleiding
Je bekijkt pagina 7 van 70
EN
12 13
PROBLEMS WITH YOUR APPLIANCE?
Depending on model:
PROBLEMS POSSIBLE CAUSES SOLUTIONS
The charger becomes hot
This is perfectly normal. The vacuum
cleaner can remain permanently
connected to the charger without
any risk.
The charger is connected but your
appliance is not charging
The charger is not properly
connected to the appliance or
is faulty.
Check that the charger is properly
connected or contact an Approved
Service Centre to change the
charger.
Your appliance stops during
operation and the charge light(s)
ash(es) very quickly
Your appliance may be
overheating.
Stop the appliance and leave it to
cool down for at least 1 hour.
The charge light ashes and the
appliance stops
The appliance has lost its charge. Recharge the vacuum cleaner.
The power-brush is not working
properly or makes a noise
The rotating brush or hose is
obstructed.
Stop the vacuum cleaner and clean
them.
The brush is worn.
Contact an Approved Service Centre
to change the brush.
The belt is worn.
Contact an Approved Service Centre
to change the belt.
The power-brush stops during use
of the vacuum cleaner
The heat safety device has come
on.
Stop the vacuum cleaner. Check
that nothing is obstructing the
rotation of the brush; if there is an
obstruction, remove it and clean
the power-brush, then turn on the
vacuum cleaner.
Your vacuum cleaner suction is not
working properly or is making a
whistling noise
The tube or hose is partially
blocked.
Unblock them.
The dust collector is full. Empty it and clean it.
The dust collector is not properly
tted.
Re-position it correctly.
The suction head is dirty.
Remove the power-brush and clean
it.
The motor protection lter is full. Clean it.
When the vacuum cleaner is
charged, the charge light(s) ash(es)
red or very quickly.
The correct charger is not being
used or the charger is faulty.
Contact an Approved Service Centre
to change the charger.
The red LED on the product ashes
during use
The suction head brush is blocked.
Stop vacuuming and check that
there is nothing blocking the
rotation of the brush.
The battery temperature is too
high.
Leave the product to rest for
30 minutes. If the problem persists,
replace the battery.
The tube and/or suction head
connectors are dirty or damaged.
Clean the tube and suction head
connectors with a cloth.
The suction motor is not working.
Contact an Approved Service Centre
to have your appliance repaired.
Please keep this user manual.
re. If the batteries leak and in case of contact, do not rub
your eyes or any mucous membranes. Wash your hands
and rinse your eyes with clean water. If the discomfort
persists, consult your doctor.
• WARNING - The battery used in this appliance may
present risk of re or chemical burn if used incorrectly. It
should not be disassembled, short-circuited or stored at
< 0°C and > 45°C or incinerated. Keep out of the reach of
children. Do not disassemble it or throw it in re.
• If the appliance is to be stored unused for a long period,
the batteries should be removed.
ENVIRONMENT
In accordance with existing regulation, any end-of-life appliances must be taken to an approved Service
Centre which will take responsibility for managing their disposal.
Let’s help protect the environment.
Your device is designed to work for many years. But when you decide to replace it,
don’t forget to think about how you can help protect the environment by allowing it
to be reused, recycled or recovered in some other way. Waste electrical and electronic
equipment may contain harmful substances that can cause harm to the environment and
human health.
This label indicates that this product must not be disposed of with household waste. Take it to a
collection point, to the distributor when buying a new equivalent product, or an approved service
center for processing.
Before disposing of the device, remove the battery and dispose of it in accordance with local laws
and local arrangements.
If you have any questions, please contact your product dealer who can tell you what to do.
Bekijk gratis de handleiding van Rowenta X-Force Flex 9.60, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Rowenta |
| Model | X-Force Flex 9.60 |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 6907 MB |
