Rowenta X-Force Flex 8.60 RH9639 handleiding

Stofzuiger

Rowenta

95 pagina's

PDF beschikbaar

Handleiding

PROBLEMS WITH YOUR APPLIANCE?

Depending on model:

PROBLEMS POSSIBLE CAUSES SOLUTIONS

The charger becomes hot

This is perfectly normal. The vacuum

cleaner can remain permanently

connected to the charger without any

risk.

The charger is connected but your

appliance is not charging

The charger is not properly connected

to the appliance or is faulty.

Check that the charger is properly

connected or contact an Approved

Service Centre to change the charger.

Your appliance stops during operation

and the charge light(s) ash(es) very

quickly

Your appliance may be overheating.

Stop the appliance and leave it to cool

down for at least 1hour.

The charge light ashes and the

appliance stops

The appliance has lost its charge. Recharge the vacuum cleaner.

The power-brush is not working

properly or makes a noise

The rotating brush or hose is

obstructed.

Stop the vacuum cleaner and clean

them.

The brush is worn.

Contact an Approved Service Centre to

change the brush.

The belt is worn.

Contact an Approved Service Centre to

change the belt.

The power-brush stops during use of the

vacuum cleaner

The heat safety device has come on.

Stop the vacuum cleaner. Check that

nothing is obstructing the rotation of

the brush; if there is an obstruction,

remove it and clean the power-brush,

then turn on the vacuum cleaner.

Your vacuum cleaner suction is not

working properly or is making a

whistling noise

The tube or hose is partially blocked. Unblock them.

The dust collector is full. Empty it and clean it.

The dust collector is not properly tted. Re-position it correctly.

The suction head is dirty. Remove the power-brush and clean it.

The motor protection lter is full. Clean it.

When the vacuum cleaner is charged,

the charge light(s) ash(es) red or very

quickly.

The correct charger is not being used

or the charger is faulty.

Contact an Approved Service Centre to

change the charger.

The red LED on the product ashes

during use

The suction head brush is blocked.

Stop vacuuming and check that there

is nothing blocking the rotation of the

brush.

The battery temperature is too high.

Leave the product to rest for 30minutes.

If the problem persists, replace the

battery.

The tube and/or suction head

connectors are dirty or damaged.

Clean the tube and suction head

connectors with a cloth.

The suction motor is not working.

Contact an Approved Service Centre to

have your appliance repaired.

Please keep this user manual.

Bekijk gratis de handleiding van Rowenta X-Force Flex 8.60 RH9639, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.