Rowenta Silver Art CT500 handleiding
Handleiding
Je bekijkt pagina 6 van 38
8
- bed and breakfast type environments.
PRIOR TO FIRST USE
Operate your coffee maker for the first time
without coffee with using 1 litre of water to
rinse the circuit.
MAKING COFFEE
(Follow the illustrations 1 to 7)
- Only use cold water and a n°4 coffee filter
paper.
- Do not fill beyond the maximum water
level marked on the water tank.
1 – Switching on your coffee maker:
- For models with isotherm jugs, press the
transparent button. It will light up with a
white light and will return to its initial
position once it is released.
Note: Models equipped with an isotherm jug
have an automatic stop system at the end of
the cycle.
- For models with pouring jugs, press the
transparent button. It will light up with a
white light and will remain in this position.
To switch off the machine, move the
button back to its initial position (the light
will be extinguished).
2 - For models with isotherm jugs:
- To keep the jug warm longer, rinse it with
hot water prior to use.
- The lid of the isotherm jug must be closed
tightly towards the left as far as possible
when making and keeping coffee hot,
figure 11.
- To serve the coffee, press down the lever
on the lid isotherm jug, figure 10.
3 - For all models:
- This coffee maker has a non-drip system
which allows you to serve a coffee before
all of the water has passed through the
filter. Place the pouring or isotherm jug
back in position rapidly to avoid any
overflows.
- Wait for a few minutes before making
coffee again.
CLEANING
- To remove the used coffee, remove the
filter holder from the coffee maker, figures
8 and 9.
- Unplug the appliance.
- Do not clean the appliance when it is still
hot.
- Clean with a soft cloth or a damp sponge.
- Do not immerse the appliance in water or
place it under running water.
- The filter holder is dishwasher-safe.
DESCALING
- Descale your coffee maker every 40
cycles or so.
You can use:
• either a sachet of descaler from the shops
diluted in ½ litre of cold water.
• or 2 large cups of commercial white
vinegar available from hardware stores.
- Pour the descaling solution into the water
tank (4) and switch on the coffee maker
(without any coffee in it).
- Let half of the solution pour into the glass
or isotherm jug (7), then turn the
appliance off by pressing the "On / Off"
button, figure 7.
- Leave to act for around one hour.
- Switch the coffee maker on again and run
through the rest of the descaling solution.
- Rinse the coffee maker by operating it 2 or
3 times with 1 litre of water and without
coffee.
TThhee gguuaarraanntteeee ddooeess nnoott ccoovveerr ccooffff eeee
mmaakk eerrss wwhhiicchh ddyyssff uunnccttiioonn oorr nnoo lloonnggeerr
ffuunnccttiioonn dduuee ttoo aa llaacckk ooff ddeessccaalliinngg..
ACCESSORIES
- Isotherm jug (CT500 or CT400 models)
- Glass pouring jug (CG400 model)
TROUBLESHOOTING
• Check:
- the plug/socket
- that the "ON-OFF" switch (indicator light
lit) is in the ON position.
- that the filter holder is tightened correctly
into place.
GB
cafetie?resilverart+norme:082796320/05/0910:23Page8
Bekijk gratis de handleiding van Rowenta Silver Art CT500, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Rowenta |
| Model | Silver Art CT500 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4665 MB |
