Rowenta Power Space RO2341 handleiding
Handleiding
Je bekijkt pagina 12 van 34
12
USE
1. Assemblage of the parts of
the appliance
• Push the flexible hose (17) securely into the
suction opening (10) until your hear a clicking
sound - fig.1. To remove it, press the button of
the hose connector and pull - fig.2.
• If your vacuum cleaner is equipped with the
telescopic tube* (18) : push the adjustment
knob forward, pull the desired tube length
out then release the button to lock - fig.3a.
Slot in the extension tube* (26) if necessary.
Otherwise, assemble the two tubes* (19),
turning them slightly - fig. 3b.
• Fit the desired accessory to the end of the
tube:
Choose the right accessory
•
For rugs and carpets: use the 2-position
nozzle (21) on carpet position (retracted
brush) or the turbobrush* (fibres and animal
hairs).
• For delicate smooth floorings, such as parquet,
laminated flooring or tiles, it is recommended to
use either :
- the nozzle for smooth floors with grooves*,
with the brush retracted (20B a+b)
- the dual position vacuum head (21), with the
brush extended ( *).
•
For corners and areas which are difficult to
reach: use the slot tool attachment
convertible into a brush* (23) in the flat tool
attachment position.
•
For upholstery and delicate surfaces : use the
crevice tool convertible into brush* (23) or
the upholstery nozzle* (22) or the brush
integrated to the nozzle (17).
2. Connecting the cord and
starting the appliance
• Unwind the power cord completely, plug
your vacuum cleaner in - fig. 4 and press the
On/Off pedal (2) - fig.5.
• Set the suction power:
- using the electronic power regulator (3) : turn
the switch on the electronic regulator : to set
the suction power: towards maximum
position for floors and minimum position for
furniture and fragile fabrics - fig. 6.
- with the mechanical power regulator on the
grip: open the slider on the grip to manually
reduce suction power, e.g.: on fragile
surfaces… - fig. 7.
3. Storing and transporting the
appliance
• After use, stop your vacuum cleaner by
pressing the On/Off pedal (2) and unplug it -
fig. 8. Wind the power cord by pressing the
cord winder pedal (4).
• In vertical position, put the telescopic tube*
(18) in its storage under the appliance (1b) -
fig. 9.
• In horizontal position, put the nozzle (21) in
its case at the back of the appliance (1a) - fig.
10.
• Carry your vacuum cleaner easily using its
carry handle (7).
IMPORTANT Always switch off and unplug
your vacuum cleaner before changing the
accessories.
Instructions regarding the energy label
This is a general purpose vacuum cleaner.
To achieve energy efficiency and the clea-
ning performance category indicated on
carpets, please use the dual position
vacuum head (21), with the brush retracted
( *) .
To achieve energy efficiency and cleaning
performance category indicated on hard
floors with joints and grooves, please
either use :
• the nozzle for smooth floors with grooves*
(20B.a) without the removable brush (b)
• the dual position vacuum head (21), with
the brush retracted ( *).
The data provided relating to the energy
label was established using the measuring
methods defined in the Directives 665/2013
of 3 May 2013 and 666/2013 of 8 July 2013.
*Depending on model: equipment specific to certain models or optional accessories.
EN
NC00903555-03_RO23_ASPIRATEUR_POWER-SPACE_NC00903555/03 16/06/2016 16:27 Page12
Bekijk gratis de handleiding van Rowenta Power Space RO2341, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Rowenta |
| Model | Power Space RO2341 |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 4048 MB |
