Rowenta Intense Pure Air XL PU6020 handleiding

Niet gecategoriseerd

Rowenta

88 pagina's

PDF beschikbaar

Handleiding

1616

Press Ambient light Air quality indicator Control panel

1 Light up Light up Light up

2 Moderate light Moderate light Moderate light

3 Off Moderate light Moderate light

4 Off Off Moderate light

TIMER / DELAYED START

If the appliance is on: you can use this button to define the operating duration. Briefly press the button

to select the number of operating hours desired (1, 2, 4 or 8) and the appliance will automatically turn

off at the end of the selected period.

If the appliance is off: briefly press the button to set the appliance to turn on in a certain number of

hours (1, 2, 4 or 8).

3D PURE AIR FUNCTION (adjustable grid)

You can adjust the position of the air outlet grid manually, as desired. For an optimum, even flow of

purified air in the room, set the angle to 45°; for maximum comfort, set the angle to 90°.

MAINTENANCE

Always switch the appliance o with the button (8) and unplug it before conducting any maintenance ope-

ration.

You can clean the appliance with a slightly damp cloth.

IMPORTANT: Never use abrasive products which could damage your appliance’s appearance.

FILTERS

Filter Action Cycles

Pre-lter Clean Every 2 to 4 weeks

Active carbon lter Replace Every 12 months

Allergy+ lter Replace Every 2 years

NanoCaptur lter Replace

Color changing

(see Color chart on filter)

This data is based on an average use of 8 hours per day at speed 2.

The recommended frequency for cleaning and replacing the filters may vary depending on the dura-

tion of use and the operating environment.

• A “PART” light indicates when the particle filter needs to be replaced.

The ‘Odor’ light display indicates when the carbon filter needs replacing.

• The NanoCaptur filter contains translucent granules which change color according to the for-

maldehyde absorption rate. Refer to the color chart on the inside of the panel or the filter itself

to establish the filter saturation rate.Once the saturation rate has reached its maximum, the filter

must be replaced. You have to check the filter saturation rate every six months.

• The pre-filter can be re-used: remove the dust using a vacuum cleaner or wash with water.

CAUTION:

• The appliance’s efficiency can be reduced if the pre-filter is not cleaned regularly.

• Never use a pre-lter that is still damp.

• The pre-lter is the only lter which can be re-used and washed with water. The particle, NanoCaptur

and active carbon filters cannot be cleaned and re-used. Never wash with water.

Bekijk gratis de handleiding van Rowenta Intense Pure Air XL PU6020, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.