Rowenta Intense Aqua Control HU5120 handleiding

Niet gecategoriseerd

Rowenta

72 pagina's

PDF beschikbaar

Handleiding

10min

HOW THE APPLIANCE OPERATES

This appliance has 2 operating modes (MANUAL or AUTOMATIC) as well as various additional func-

tions.

• ”ON/STAND-BY”: Switch on / Standby (Stop); Button A.

Press button (A) to start the appliance or to put it on standby.

MANUAL FUNCTION MODE:

Adjusting the required (target) level of humidity and vaporisation speed

• Humidity level: Button C for adjusting the required (target) humidity level;

Select the required humidity level by pressing button C several times.

When SELECT appears, the humidity level displayed is the required level that you have set the ap-

pliance to: between 40% and 75% RH or “Co” for a continuous operation (there is a safety stop sys-

tem if the humidity level in the room exceeds 90% RH).

When the “HOUSE” logo is visible without SELECT, the humidity level displayed is that of the area

in the room around the appliance.

PLEASE NOTE: This setting cannot be used for “Intelligent” modes.

WARNING: In the continuous operating mode, the humidity in the room can reach very high levels

that are not beneficial to health and can damage certain objects. The recommended optimal humi-

dity level is between 50 and 60% HR.

• Vaporisation speed: Button F for setting the vaporisation speed;

Select the required vaporisation speed by pressing button F several times. There are three vaporisa-

tion speeds to choose from.

PLEASE NOTE: This setting cannot be used for “Intelligent” modes.

AUTOMATIC OPERATION MODES:

How to use the 3 pre-set operating modes

• INTELLIGENT MODES: Button E for selecting the pre-set operating modes;

You can select one of the three pre-set modes by pressing button E several times.

AUTO Mode: Automatic operation mode for a required humidity level pre-set at 55% RH; the ap-

pliance will automatically adapt its vaporisation speed depending on the humidity of the room.

BABY Mode: Automatic operation mode for a required humidity level pre-set at 50% RH; the ap-

pliance will automatically adapt its vaporisation speed depending on the humidity of the room. Once

it has been running for 7 hours the appliance will stop automatically.

PLEASE NOTE: The lights and beeps are deactivated in this mode.

NIGHT Mode: Automatic operation mode for a required humidity level pre-set at 50% RH; the ap-

pliance will gradually reduce its vaporisation speed. Once it has been running for 8 hours the ap-

pliance will stop automatically.

PLEASE NOTE: The lights and beeps are deactivated in this mode.

Bekijk gratis de handleiding van Rowenta Intense Aqua Control HU5120, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.