Rowenta Fleckenreiniger IN5020 Handleiding (117 Pagina's)

Handleiding

EN EN

16

17

Clic

Hold the

appliance by the

carry handle.

Always position your

device on solid, level

ground for use.

Do not place the

product on a carpet

with piles longer than

10mm.

Remove the clean

water tank.

Open the water

tank cap.

Fill the tank with cold water up to

the mark according to the

surface area to be cleaned (small/

large surface area)

Pour in the cleaner up

to the mark indicated.

Use only CLEAN IT

cleaners.

Close the cap and

reposition the water

tank on the appliance.

Before use, unwind the power cord fully

and plug in the plug.

Completely unwind the suction hose

Attach the desired accessory to the hose cuff.

You will hear a click when it is in place.

Tip: Perform a

preliminary test on

a non-visible part of

the fabric you wish to

clean.

You can ﬁnd all the

tips on page 21.

Turn on your appliance. Do not start

the appliance without the water tanks

properly ﬁtted. Do not remove the

tanks while the appliance is in use.

Spray the water/cleaner

mixture onto the stain by

pressing the trigger.

Brush and vacuum the surface to be

cleaned from top to bottom. Repeat

as many times as is needed to clean

the stain.

Carrying and positioning the appliance

Filling the water tank

Connecting the appliance and unwinding the hose

Installing your CLEAN IT

1

2

3

4 5

1 2 3

Using your CLEAN IT

1

2

3

When the clean water

tank is empty, turn off the

unit before removing the

water tank to reﬁll it.

Bekijk gratis de handleiding van Rowenta Fleckenreiniger IN5020, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.