Rowenta City Space Cyclonic RO2544 handleiding

Niet gecategoriseerd

Rowenta

158 pagina's

PDF beschikbaar

Handleiding

* According to model : this piece or accessory is specific to

certain models or can be bought separately.

REMOVE THE DUST TRAY (13)

• Withdraw the tube (19) from the vacuum opening (10) - Fig.2.

• Remove the dust tray (13) from its housing (7) : take the tray handle (13a) and remove the tray – fig. 14.

1. EMPTY THE DUST TRAY

• Press on the opening lever (13c) – fig. 15a—and then remove the lid – fig. 15b.

• Empty the tray over a bin – Fig. 16.

• Make sure that no dust remains inside the tray.

• Place the lid back: place the stops in their slots – fig. 17a – and close the lid – fig. 17b.

• Replace the tray (13) in its compartment (7) – Fig. 18.

2. CLEANING THE BLACK FOAM FILTER (14A)

• Pull simultaneously on the opening clips (13d) of the HEPA filter case - Fig.19.

• Separate the black foam filter (14a) from the HEPA filter (14b) - Fig. 20.

• Wash the black foam filter (14a) under the tap, squeeze it out like a sponge and leave to dry for 12 hours

- fig. 21.

• Once the foam is completely dry, assemble the HEPA filter case (14): black foam filter (14a) and HEPA fil-

ter (14b) under the dust tray (13) – Fig. 22, then replace the dust tray inside its compartment (7) – Fig. 18.

3. CLEAN THE DUST TRAY (13) AND THE AIR/DUST SEPARATOR (15)

• Press on the opening lever (13c) – fig. 15a—and then remove the lid – fig. 15b.

• Empty the tray over a bin – Fig. 23.

• Unlock the HEPA filter case (14) by simultaneously pulling on the opening clips (13d) located at either

end of the dust tray – Fig. 24.

• Remove the HEPA filter case (14) – Fig. 25.

• Turn the compartment over and place the accessory (18b) into the lock slot of the air/dust separator base

(17) - fig 26.

• Open, making sure to turn in the proper sense for unlocking ( ) – Fig.27.

• Remove the dust separator base (16) - Fig. 28.

• Unclip then remove the air/dust separator (15) by turning it in the unlocking direction ( ) – Fig.29.

• Then rinse the dust tray (13), the air/dust separator base (16) and the air/dust separator (15) with soapy

water – Fig. 30.

• Dry them with a cloth – Fig. 31.

• Once dry, replace then clip the air/dust separator (15) on the air/dust separator base (16), following the

right sense for locking ( ) – Fig.32.

• Place them back on the dust tray (13) - fig 33.

• Place the accessory (18b) into the lock slot of the air/dust separator base (16) - fig 34.

• Close, making sure to turn in the proper sense for locking ( ) – Fig.35.

• Clip the HEPA filter case (14) (black foam filter (14a) + HEPA filter (14b)) onto the tray – Fig. 36.

• Replace the tray (13) in its compartment (7) – Fig. 18.

Important! To optimise the performance of your vacuum cleaner, make sure you clean the foam (14a)

each time you empty the dust tray (13).

Warning!

The black foam filter (14a) should only be put back into the appliance when it is completely dry. You

can use your vacuum cleaner while the black foam filter (14a) is drying by using the replacement

black foam filter (14abis).

Important: Clean the dust tray (13) and the dust separator (15) every month.

Important: Empty the dust tray (13) after each use.

Warning: remember to stand over a bin every time you clean the dust tray.

RO_ASPIRATEUR_CITY_SPACE_903359_903359/01 12/06/13 15:34 Page11

Bekijk gratis de handleiding van Rowenta City Space Cyclonic RO2544, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.