Rowenta ActiSteam DZ2020 handleiding
Handleiding
Je bekijkt pagina 13 van 79
GB
F
NL
D
DK
S
N
FIN
PL
CZ
SK
SLO
SR
HR
RO
H
EST
LT
LV
TR
BG
AR
PROBLEMS?
If you have any further problems or queries please contact our Custo-
mer Relations Team first for expert help and advice:
Helpline: 0845 602 1454 - UK / (01) 4610390 - Ireland
Or consult our web site: www.rowenta.co.uk
Subject to modifications !
Problems Cause Solution
The iron is
plugged in, but the
soleplate of the
iron remains cold.
No mains supply. Check that the mains plug is
properly inserted or try plugging
the iron into a different socket.
Temperature control set
too low.
Set the temperature control to a
higher temperature.
The automatic electronic
cut-out* is active.
Move your iron.
Thermostat
control light goes
on and off.
This is normal. When the thermostat control light
goes on and off the iron is heating
up. As soon as the thermostat
control light goes off the set
temperature has been reached.
None or too little
steam is being
emitted.
Steam control set on dry
position .
Turn the steam control to the
required setting area.
Not enough water in the
water tank.
Fill the water tank.
Brown streaks
come through the
holes inthe
soleplate and
stain the linen.
Residues in the steam
chamber or on the
soleplate.
Use the Self Clean function then
clean your iron.
Use of chemical
descaling agents.
Do not add any descaling agents to
the water in the water tank. Use the
Self Clean function and clean your
iron.
Fabric fibres have
accumulated in the holes
of the soleplate and are
burning.
Clean the soleplate with a
non-metallic sponge.
Vacuum the holes of the soleplate
from time to time.
Your linen is not rinsed
sufficiently or you have
ironed a new garment
before washing it.
Ensure linen is rinsed thoroughly
to remove any soap deposits or
chemicals on new garments which
may be sucked by the iron.
Use of starch. Always spray starch onto the
reverse side of the fabric to be
ironed and clean your iron
soleplate.
Pure distilled /
demineralised or
softened water is
being used.
Only use untreated tap water or
mix half tap water with half
distilled/demineralised water. Use
the Self Clean function and clean
your iron.
Iron is leaking. Overuse of shot of steam
button.
Allow more time between each
shot.
Soleplate temperature
too low.
Set the temperature control to a
higher temperature.
The Anti-Drip sytem prevents water escaping from the soleplate
when the temperature is too low.
Anti-Drip system (depending on model)
Anti-Calc system (depending on model)
The integrated anti-calc system gives better quality ironing: a
constant flow of steam throughout the ironing session and longer
lasting performance of your appliance.
13
1103905676 DZ2000:1103905676 DZ2000 22L-V6 17/02/09 14:25 Page 13
Bekijk gratis de handleiding van Rowenta ActiSteam DZ2020, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Rowenta |
| Model | ActiSteam DZ2020 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8382 MB |
