Rommer CM-603 INOX handleiding
Handleiding
Je bekijkt pagina 19 van 24
OPERATION
LIGHTING
LIGHT REPLACEMENT
The air must not be discharged into a flue that is used for exhausting fumes from appliances
burning gas or other fuels.
OFF MOTOR SWITCH: Press on this switch to stop the motor
operation.
SPEED SWITCH: Press on this switch, the motor runs at LOW
speed.
SPEED SWITCH: Press on this switch, the motor runs at
MEDIUM speed.
ON/OFF LIGHTING SWITCH: Press on this switch to turn on the
lights, and press again to turn them off.
SPEED SWITCH: Press on this switch, the motor runs at HIGH
speed.
● Switch off the extractor hood and isolate the extractor hood by pulling out the mains plug
or switching off the fuse.
● Remove the grease filter.
● Remove the light by levering its fitting from the hood body (this may require pressure or
force to be applied).
● Disconnect the connector of the light.
● Replace the light with a new one of the same type, making sure that you connect the
light with the light cable correctly.
● Reconnect the power by inserting the mains plug or by switching on the fuse.
Information
8
Bekijk gratis de handleiding van Rommer CM-603 INOX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Rommer |
| Model | CM-603 INOX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2282 MB |
