Rommelsbacher CT 2002/IN handleiding
Handleiding
Je bekijkt pagina 23 van 32
23
Residual Heat indicator
The appliance is equipped with a residual heat indicator for each cooking zone. It indicates
that the cooking zone has reached a certain temperature during operation or whether it is
still hot after operation.
• If the temperature on a cooking zone has reached
a value of more than 60 °C due to the waste heat
emitted by the pot, the LED heat (8a) will glow.
• As soon as the temperature has dropped below 60 °C
or the appliance is disconnected from the mains, the
LED heat (8a) goes out.
In standby mode, any residual heat is also shown on the display. At a temperature of over
60 °C, the display shows , at lower temperatures
Getting acquainted with your appliance
Touch Control Sensors
The appliance is equipped with touch control sensors which grant an easy and convenient
handling.
• Touching the sensor with your finger activates the
relevant function and an acoustic acknowledgement
signal.
NOTE: Always keep the control panel clean and dry.
Do not touch it with fingers wet and do not use it as
a shelf of de-posit as this might lead to malfunctions.
Pot recognition
The appliance is designed to recognise whether there is suitable cookware on a cooking
zone.
• If no suitable vessel is recognized on the cooking
zone after switch-on, the display (4) will show
and an alternate warning signal will sound. If no pot
is recognized within 60 seconds, the appliance will
switch automatically into the standby mode.
• If a pot is removed from the cooking zone during operation, the display (4) will show
and an alternate warning signal will sound. If a pot is re-placed within 60 seconds, the
cooking process will continue with the level last set and an operating time that might
have been set before will continue to run. However, if no pot is recognized within 60
seconds, the appliance will switch automatically into the standby mode.
Cooling fan
After switch-on an inside fan starts working, which cools the interior components of the
appliance in order to prevent the appliance from overheating. It is normal for the fan to
continue running in standby mode after a long operation time. The fan operates at a low or
high speed depending on the conditions.
Bekijk gratis de handleiding van Rommelsbacher CT 2002/IN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Rommelsbacher |
| Model | CT 2002/IN |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 2712 MB |
