Rollei Wildlife Camera 4K WiFi handleiding

Niet gecategoriseerd

Rollei

68 pagina's

PDF beschikbaar

Handleiding

Operation

Inserting the Batteries

– Press the battery slot opening button to open the battery slot.

– Insert the batteries into the battery slot according to the correct polarity.

– Push the battery slot back into the wildlife camera until you hear it click

into place.

Connecting a Power Adapter

– Open the silicone cover over the DC connection of the wildlife camera.

– Insert an external power adapter with DC 6.0 V / 2.0 A (not included in the

scope of delivery) with the plug through the opening in the housing of the

wildlife camera and connect it to the DC connection of the wildlife camera.

Inserting/Removing a Memory Card

– Open the housing closure on the side of the wildlife camera.

– Insert an SD/SDHC memory card into the memory card slot of the wildlife

camera until you hear it click into place.

– Press on the protruding end of the SD/SDHC memory card until it is ejected

a little and remove it from the camera.

Note:

– Before inserting or removing the SD/SDHC memory card, switch off the

camera to prevent data loss and technical defects.

– SD/SDHC memory cards with a capacity of up to 64 GB and class 10 are

supported.

– It is recommended to format the SD/SDHC memory card before inserting

it. However, note that any data on the memory card will be deleted during

formatting.

Switching On/Off

– Slide the on/off switch to ”ON“ to activate the wildlife camera.

– Slide the on/off switch to ”SET“ to manage the saved recordings and

settings (see section ”Managing Settings“).

– Slide the on/off switch to ”OFF“ to switch off the wildlife camera.

Bekijk gratis de handleiding van Rollei Wildlife Camera 4K WiFi, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.