Rollei LUX 100 Bi-Color handleiding
Handleiding
Je bekijkt pagina 35 van 48
35
Operation
Remove the protective film: Before using the COB
permanent light for the first time, remove the protective
film from the device and the display.
Remove the protective cap: Remove the protective
cap from the COB permanent light before each use,
before switching on the device.
Follow these steps to ensure proper and safe use of the COB
permanent light.
1. Switch on/off
– Switch on: Connect the device to the power source and then press
and hold the on/off switch [1].
– Switch off: Long press the on/off switch [1] to switch off the
device.
2. Wireless connection
– Briefly press the wireless connection setting button [2] to switch
between 2.4GHz (remote control for Candela/Lux) and app.
– Press the button button for a long time to start the pairing to start
pairing.
3. HSI mode (only for RGB lights)
– Switch to HSI mode
– Briefly press the adjusting dial [11] to select the HUE/SAT options.
– Turn the adjusting dial [11] to adjust the colour tone [HUE] and
saturation (SAT) according to your wishes.
– Hue (HUE): 0 - 359° Saturation (SAT): 0 - 100 %
– These steps allow you to easily adjust the colour and the intensity
of the lighting in HSI mode to achieve the desired effect.
Bekijk gratis de handleiding van Rollei LUX 100 Bi-Color, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Rollei |
| Model | LUX 100 Bi-Color |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 3059 MB |
