Handleiding
Je bekijkt pagina 4 van 20
4
The placement of your microphone is critical in avoiding feedback through your RAM BT
unit. Never set up your microphone in front of the speaker. Always set up your microphone
behind the speaker. When approaching the speaker to make any adjustments, we
recommend approaching the speaker from the rear and not walking directly towards the
front of the speaker.
Unlike a PA setup which face the crowd, stage monitors are set up to face the performer
on stage and to direct the sound towards them. This presents a particular problem as now
feed back may occur. To avoid stage monitor feedback the following precautions should
be taken.
How To Avoid Irritating Feedback
Stage Monitor Setup
1. Choose a microphone with high directivity, i.e. cardioid or hyper-cardioid polar
pattern.
2. Never point the microphone directly down in front of the speaker. Holding the micro
phone in normal position will allow you to be closer to the stage monitor with out feed
back.
3. See illustration below as to position of microphones when mounted in stand. Cardioid
polar pattern microphones should always be at a 90 degree angle to the axis of the
stage monitor. Hyper Cardioid polar pattern microphones should be positioned at an
acute angle to the sage monitor.
You may choose to add a feedback eliminating processor to your system for additional
exibility on stage.
Cardioid Polar Pattern Hyper Cardioid Polar Pattern
Bekijk gratis de handleiding van Rockville RAM15BT V2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Rockville |
| Model | RAM15BT V2 |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 1853 MB |
