Robot Coupe MP 450 Turbo V.V. handleiding

Blender

Robot Coupe

62 pagina's

PDF beschikbaar

Handleiding

INTRODUCTION TO YOUR NEW

ROBOT-COUPE POWER MIXER

Robot-Coupe has developed a complete line of

power mixers. The features of each are described in

the table below.

The Robot-Coupe Power Mixers perform a host of

culinary feats. The mixer attachment will allow you

to make soups, vegetable purees and pulps while

the whisk attachment is ideal for making pancake

batter, mayonnaise, beaten egg whites, chocolate

mousse, butter sauces, whipped cream or smooth

fromage frais.

The variable speed function will enable you to

adjust the speed to suit each preparation and to

start the processing at a lower speed in order to

reduce splashing.

The power mixer is easily assembled and disassem-

bled for maintenance and cleaning.

OPERATING THE POWER MIXER

• OPERATION

The machine is supplied with a single-phase

moulded plug.

• CONTINUOUS OPERATION

8. Follow steps 1-6 above,

then : While the control but-

ton (CB) is pressed, press the

locking button (LB).

9. Release the control button

(CB).

10. Release the locking

button (LB), and the power

mixer will run continuously.

11. To stop the power

mixer, press and release the

control button (CB).

• VARIABLE-SPEED OPERATION

Follow steps 1 to 6 above, then change the speed

of the motor by turning the button (VS) toward the

maximum or minimum as required.

It is advisable to start at a low speed when using the

whisk.

Principal of automatic speed regulation : Once you

have selected the right speed, allow the mixer to run

on it’s own. The speed will remain the same, even if

the consistency of the product changes.

• MASHED POTATOES FUNCTION

( MP 350 Turbo Combi, MP 450 Turbo Combi,

MP 450 Turbo FW).

A self-regulating speed system

has been specially developped for

pureeing tasks using the whisk.

Before connecting the

machine, connect ne-

cessarily the

power cord to

the machine.

(see opposite

picture)

Make sure that the grip of the power cord is pushed

well (it is necessary to cross necessarily 2 notches of

the grip, if it is not the case it will be impossible to

put on the control button.

The power mixer is equipped with electrical current

and temperature overload protection. If the power

mixer stops unexpectedly you may try to restart it

by following steps 3-5 below. If the power mixer

does not restart, allow it to cool for a period of up

to 30 minutes and the temperature overload will

automatically reset. You should then be able to

restart following steps 3-5 below.

1. Check that the control button

(CB) is in the released position.

2. Connect the cord to the

power supply

3. Put the tube into the product

with the bell completely

immersed and the splash

guard in place.

4. Press and hold down the

safety button (SB).

5. Press the control button (CB)

and the power mixer will start.

6. Release the safety button

(SB).

7. To stop the power mixer, release the control

button (CB).

Models

Variable

Speed

Mixer

attachment

Whisk

attachment

Mixing tool

attachment

MP 350 Turbo

•

••

MP 350 Turbo V.V.

••

MP 450 Turbo

•

••

MP 450 Turbo V.V.

••

MP 550 Turbo

•

••

MP 600 Turbo

•

••

MP 800 Turbo

•

••

MP 350 Turbo Combi

•••

•

MP 450 Turbo Combi

•••

•

MP 450 Turbo FW

•

MP 450 Turbo FW XL

•

••

•

First

Notche

2nd

notche

TUBE

BELL

SPLASH

GUARD

MOTOR

HOUSING

Bekijk gratis de handleiding van Robot Coupe MP 450 Turbo V.V., stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.