Robinhood DWG9P6FSS handleiding
Handleiding
Je bekijkt pagina 7 van 28
Installation Instructions
Advice regarding the first wash cycle
After the appliance has been installed, immediately before running the first wash cycle, completely
fill the dispenser of Rinse (see Rinse aid).
Positioning the Appliance
Position the appliance in the desired location. The back should rest against the wall behind it, and
the sides, along the adjacent cabinets or wall. The dishwasher is equipped with water supply and
drain hoses that can be positioned to the right or the left to facilitate proper installation.
Levelling the Appliance
Once the appliance is positioned, adjust the feet (screwing them in or out) to adjust the height of the
dishwasher, making it level. In any case, the appliance should not be inclined more than 2.
NOTE: The maximum adjustment height of the feet is 20 mm.
How to Drain Excess Water from Hoses
If the sink is 1000mm higher from the floor, the excess water in hoses cannot be drained directly
into the sink. It will be necessary to drain excess water from hoses into a bowl or a suitable
container that is held outside and lower than the sink.
Water Outlet
Connect the water drain hose. The drain hose must be correctly fitted to avoid water leaks.
Ensure that the water inlet hose is not kinked or squashed.
Extension Hose
If you need a drain hose extension, observe to use a similar drain hose.
It must be no longer than 4 metres; otherwise the cleaning effect of the dishwasher could be
reduced.
Syphon Connection
The waste connection must be at a height of between 50cm (minimum) and 100cm (maximum)
from the bottom of the dish. The water drain hose should be fixed by a hose clip.
Things to check before starting the dishwasher
The followings should be checked before starting the dishwasher:
• Whether the dishwasher is level and fixed
• Whether the inlet valve is opened
• Whether there is leakage at the connections of the conducts
• Whether the wires are tightly connected
• Whether the power is switched on
• Whether the inlet and drain hoses are knotted
• All packing materials and printings should be taken out from the dishwasher
7
Bekijk gratis de handleiding van Robinhood DWG9P6FSS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Robinhood |
| Model | DWG9P6FSS |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 4244 MB |
