RME 12Mic-D handleiding
Handleiding
Je bekijkt pagina 6 van 85
2. Introduction
Thank you for purchasing the 12Mic-D.
The 12Mic-D is a 12 channel microphone preamplifier designed to be the centerpiece of any
professional recording. Among its outstanding features: digital no-compromise studio quality
converters, remote control, integrated Dante® and MADI connectivity, and a user interface optimized
for rapid configuration and control.
While all 12 front-facing XLR connectors accept microphone and line level signals, the first four
connectors also accept TRS connectors with switchable high impedance (Hi-Z) for instruments. The
PAD-free microphone input stages have a 75 dB gain range and accept signals of up to +18 dBu.
The device state can be inspected and modified directly on the front panel with an encoder knob, a
display, four buttons that change their function depending on the current feature, and a button on
each input channel. It is possible to rapidly create gain groups, switch phantom power and route
signals to the headphone without entering complex submenus.
By integrating Audinate’s Dante® IP Core on a custom built RME FPGA platform, RME is not only
delivering a highly flexible solution but also gets one step closer to achieving a truly universal Audio
Networking experience. Any signal reaching the 12Mic-D can be routed and streamed over IP
networks, including MADI signals!
The coaxial MADI port and a slot for a second, independent or redundant optical MADI port (SFP
module) can be used for daisy chaining, merging and converting MADI signals with lowest latencies.
In addition, three optical ADAT output ports for up to 24 channels at single speed (for example a
combination of microphone inputs, MADI signals and Dante® signals) or 12 outputs at 96 kHz
sampling rate offer compatibility to a wide range of audio interfaces.
Multiple layers of redundancy make this product the perfect fit for live sound applications. Two fully
redundant network ports are implemented for Dante® redundancy. The MADI ports support RME’s
MADI redundancy implementation. And even the power inlet allows for redundancy with an optional
external DC power supply in addition to the IEC connector.
A web frontend offers convenient access to the device controls and its integrated routing matrix. The
integrated matrix allows free routing between analog inputs and headphone outputs, as well as all
channels of both MADI ports, Dante®, and three ADAT outputs.
The following manual provides a detailed explanation of features and their proper use. Please read
the safety instructions carefully.
Features described in this manual can change when the device firmware is updated. It
is therefore recommended to refer to the latest version of the manual available online.
Although the contents of this manual have been thoroughly checked for errors, RME cannot
guarantee that it is correct throughout. RME does not accept responsibility for any misleading or
incorrect information within this guide. RME reserves the right to change specifications at any time
without notice.
2.1. Firmware Update
New and improved features for this device, as well as bug fixes, are published on the RME website in
the download section as a firmware update. The update is provided as a compressed file with a .swu
extension and can be uploaded via web remote over USB or network.
To update the 12Mic-D:
RME 12Mic-D User’s Guide
2. Introduction | 5
Bekijk gratis de handleiding van RME 12Mic-D, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | RME |
| Model | 12Mic-D |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11970 MB |
